Toshiba 32AF44 owner manual Using the Block Channel feature V-Chip control, To block a channel

Using the BLOCK CHANNEL feature (V-Chip control)

With the BLOCK CHANNEL feature, you can block specific channels. You will not be able to tune blocked channels until you clear the setting.

You can block a maximum of four channels.

If you try to tune a blocked channel, the nearest unblocked channel will appear.

Note: The BLOCK CHANNEL feature is not affected by the

ENABLE BLOCKING setting (as described under ÒMPAA rating blockingÓ on page 30).

To block a channel:

1.Tune the TV to the channel you want to block.

2.Press MENU, and then press x or • until the SET UP menu appears.

3.Press y or z to highlight V-CHIP CONTROL, and then press •. The PIN code entering screen opens.

SET UP		SET UP
MORE		BLOCKING IS ACTIVE
V-CHIP CONTROL
		PLEASE ENTER PIN CODE
FAVORITE CH
		_ _ _ _
CH LABEL
TIMER:	0 MIN
MORE
MOVE [ ]	START [ ]	SELECT [0–9] END [EXIT]

4.Press the Channel Numbers (0–9) to enter your 4-digit PIN code (see page 29). The V-CHIP CONTROL menu opens.

5.Press y or z to highlight BLOCK CHANNEL, and then press • to open the BLOCK CHANNEL menu.

6.Press x or • to highlight SET, and then press z. The blocked channel number appears in the list.

SET UP			SET UP
ENABLE BLOCKING	[Y] N		BLOCK CHANNEL
SET RATING			[SET ] CLEAR
SET BLOCKING OPTIONS		0		0	0	6
NEW PIN CODE
BLOCK CHANNEL
			SELECT [	]	SET [	]
MOVE [ ] SELECT [	]		END [EXIT]

7.Press EXIT.

8.Repeat steps 1–7 for other channels you want to block.

To unblock a channel:

Follow steps 1–8 above, but select CLEAR in step 6.

SET UP			SET UP
ENABLE BLOCKING	[Y] N		BLOCK CHANNEL
SET RATING			SET [CLEAR]
SET BLOCKING OPTIONS		0		0	0	0
NEW PIN CODE
BLOCK CHANNEL
			SELECT [	]	SET [	]
MOVE [ ] SELECT [	]		END [EXIT]

Channel

Numbers

yzx •

MENU

Introduction

yConnecting

ourTV

Remote ControlUsing the

ySetting ourTV up

FeaturesUsing the TVÕs

Appendix

Index

33