Make one of the following connections, depending on the capabilities of your existing equipment.
Introduction
Basic Audio
TV
R L
Audio cable (supplied)
This unit
VIDEO OUT
| VIDEO IN | COMPONENT |
|
|
|
IN | VIDEO OUTPUT | VIDEO OUT |
| ||
|
|
|
| ||
|
| Y |
| L | |
| IN | OUT |
|
| |
OUT | L |
| L |
|
|
|
|
| PB/CB |
|
|
| R |
| R |
| R |
ANTENNA | AUDIO IN |
| PR/CR AUDIO OUT | COAXIAL | |
| (L1) |
|
|
|
|
AUDIO OUT
AUDIO OUT
Method 1 | Method 2 |
Better picture | Best picture |
| COMPONENT |
| VIDEO IN |
Y | |
| PB/CB |
| PR/CR |
| |
(commercially available) | Component Video cable |
| |
| (commercially available) |
| |
OUT | COMPONENT |
| |
| VIDEO OUTPUT |
| Y |
| PB/CB |
| PR/CR |
| COMPONENT VIDEO OUT |
Connections Basic Setup Recording Playback
After you have completed the connections
•Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears. Check your TV owner’s manual for details.
Notes
•Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
•When Progressive Scan mode is selected, no video signal will be output from the VIDEO OUT or
•This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.
To set progressive scan mode, refer to page 141.
Editing Function Setup Others
EN 25
Connection_UD.indd 25 | 2006/01/11 16:27:50 |
|
|
|
|
|
| ||
|
|
| ||
|
|
|
|
|