Digital Tuning
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4.
Connect the mains plug and switch the TV into standby
using the top Power button. Press any numbered or standby button on the remote control, the Local Op- tions screen will appear. This screen will appear the first time that the television is switched on and each time the television is reset.
LOCAL OPTIONS
Select your Country by using 
or 
buttons. Use
to move down through the list.
Set your Language and Audio Language out of the options available.
You can also set Subtitles OFF, as well as specifying the subtitle language.
When completed, press OK to start tuning.
After
time by using 
and 
buttons to highlight Local
Time Setting, and 
and 
buttons to set the correct time.
The Auto tuning screen will appear and the television will start to search for available stations.
The progress bar will move along the line.
DTV AUTO TUNING
You must allow the television to complete the search.
When the search is complete the Auto tuning screen will display the total number of services found.
DTV AUTO TUNING
22 
9 
Use 
or 
to move through the list to select a programme then press OK to view.
English - 8 -