Initial Tuning and programme sorting

Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 5.

Connect the mains plug and switch the TV into standby using the top Power button. Press any numbered or standby button on the remote control, the A.P.S. screen will appear. This screen will appear the first time that the television is switched on and each time the televi- sion is reset.

Auto. Programming System

Language	English
Country	UK
Txt. region	West Europe
Check the antenna cable
Start: Ok	Exit: Exit

Use the Up or Down button to highlight the Language and Country items. Press the Left or Right button to adjust the highlighted item. Select Txt. region item by pressing the Up or Down buttons. Use Left or Right button to set Txt. region. Then press OK button to start tuning.

The television will start to search for available stations.

Auto. Programming System

APS is running:

78%

Exit: Exit

You must allow the television to complete the search.

When the search is complete the television will automati- cally select programme position 1. This may not be a clear picture or the signal may be weak, so the station order can be changed using program table which will appear on the screen.

P01

Program Table

P01	BBC 1	P11
P02	C 04	P12
P03		P13
P04		P14
P05		P15
P06		P16
P07		P17
P08		P18
P09		P19
P10		P20
Delete		Move
Name		A.P.S

Exit: Exit

With the list of stations now showing use the Up or Down button to highlight the station you want to move and press the GREEN button.

Use the Up or Down button to move through the list to the preferred position, as you do so the other stations will move to make room, then press the GREEN button again. The selected station will be moved to the new position.

Repeat as necessary, then press EXIT.

If the television cannot be connected to a media re- corder/decoder with a SCART lead or if a station on another system is required, a programme position can be manually tuned in (see page 10).

English - 9 -