Toshiba SD-R5272 user manual Installing Audio Cable, Completing Installation

Page 8

Audio Cable (optional) - If you have a sound card and speakers, and would like to play audio CDs on your computer, you will need to install a CD/DVD audio cable. Toshiba's DVD Rewriteable drives use a standard 4-pin audio cable that can be purchased from most local computer suppliers. The sound cable connects to your sound card at one end and the other end connects to the digital audio connector at the left rear of the DVD Rewriteable drive (see DVD Rewriteable drive Back Panel photo for location). Refer to the instructions that came with your sound card for details on any sound- driver software required.

Figure 5.Installing Audio Cable

Completing Installation

After you have connected all the necessary cables, push the DVD Rewriteable drive completely into the computers drive slot. Mount drive per your computers instructions. The screw length should not exceed 30.5mm (measured from outside surface of side or bottom of drive to tip of screw). Replace computer cover and all outer screws.

Figure 6.Mounting Illustration

6

Image 8
Contents DVD Rewriteable Drive Contents Types of Disc Formats Supported Write Introduction SD-R5272Read Write Types of Disc Formats Supported Read DVD DVD-ROM, DVD-R/RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAMFront Panel Loading Tray Busy LightSystem Requirements Setup SD-R5272 Jumper SettingsConnecting Cables Placing DVD Rewriteable Drive inside your ComputerInstalling Audio Cable Completing InstallationPage Inserting a Disc Vertically Using the DVD Rewriteable Drive SD-R5272Drive Operation Inserting a Disc Horizontally Media Recommendations Removing a DiscSoftware Cleaning Media Usage GuidelinesEmergency Ejection Handling MediaTroubleshooting SD-R5272 SolutionSpecifications -SD-R5272 Performance Reliability EnvironmentalPower ConnectorsPhysical RegulatoryDrive Connectors -SD-R5272 ConnectorMode Select AudioInterface Pin Assignments
Related manuals
Manual 14 pages 60.35 Kb