Pioneer V8000 manual Computer Control Functions, Serial Control see Chapters 3, 4, 5

Page 10

Computer Control

Refer to the instruction manual about ‘STOP ST’.

9-pin D-Sub connector

Pin #

Terminal

Input/Output

Function

1

NC

 

 

2

RxD

Input

receive data

3

TxD

Output

send data

4

DTR

Output

data terminal ready

5

GND

--

ground

6

NC

 

 

7

RTS

Output

CTS is returned to RTS as

8

CTS

Input

it is.

9

NC

 

 

2.3Computer Control Functions

2.3.1Serial Control (see Chapters 3, 4, 5 and 6)

The player and computer are based upon the RS-232C protocol and are connected through the TxD, RxD, DTR and GND terminals.

2.3.2Extend Terminal Control (see Chapter 9)

Control the player with the Extend Terminal Switches (SW#).

Even if the Key Lock is set (active), the extend terminal control is available.

2.3.3External Power Control

Control the player’s power with the Power Pin within the Interface Connector.

If the player detects a high signal throughput (100m/sec or more) during the Standby mode, the player powers ON. If the player detects the same signal during the Power ON mode, the player powers OFF and switches to the Standby mode.

The specifications for the Power pin are as follows:

Maximum Input Voltage

Less Than 12V

 

 

High Level Signal

More Than 3.3V

 

 

Low Level Signal

Less Than 0.5V

 

 

Standby mode

more than 100 msec

Power ON

- 3

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DVD-V8000 Document No. DVDV8000RS001-0100a FCC Information Table of Contents Current Player Condition Request Descriptions Operating Modes 102 100103 Introduction Chapter Number DescriptionInterface Interface ConnectorSerial Interface Pin Specification Pin # Terminal Input/Output FunctionSerial Control see Chapters 3, 4, 5 External Power ControlComputer Control Functions Extend Terminal Control see ChapterPower on mode Computer Control Power OFF More than Msec Serial Control Serial Interface SpecificationsCommunication with a Computer Command and Status ExampleComputer Control Register/Switch Setting at Power on Error MessagesInitial Setting OFFCommand Structure DVD-V8000 supports the commands listed belowPage Command String Command MnemonicArgument Status Returns Error MessageRequest Status Return ST?FCR Timing?FSTCR 2ndfield Ext.Sync 1stfield Field condition Close Command DescriptionsOpen RejectSacr RCR StartRjcr RCR SacrPlay Pause Still DVD, VCDSfcr Step Forward DVD, VCD Step Reverse DVDStcr RCR SrsrsrcrMulti-Speed Forward DVD, VCD Multi-Speed Reverse DVD Scan Forward Scan Reverse Scan StopNscr RCR DVD VR VCD Speed DVD, VCDMfcr RCR 4SPMFCR RCR Search4SPMRCR CH5SECR Search & PlayTR2SECR CH5SLCR Stop MarkerTR2SLCR RCR ⇒ Still mode TM0325SMPLCR RCRLosecr RCR Lead-Out SymbolClear Loplcr RCRTM500SMPLCR RCR Frame DVDBlock Number CD Clcr RCRTitle DVD Time excludes discs without Time CodesChapter DVD CH23SECRSelect Subtitle DVD Index CDTrack CD, VCD TI5SECRSelect Angle DVD Select Audio DVDSelect Aspect DVD 0SUCR RCR1AGCR RCR Select Parental-Level DVDAudio Control DVD, CD, VCD DVD5ADCR RCR Video Control0VDCR RCR 3DSCR RCR Display Control1DSCR 0DSCR RCRKey Lock Command Stack Play DVD Stack Group Set DVDNumbers Stack Data UploadBytes 1214 Next Data Address Bytes 1216 Wait RepeatGoto Pass Through Stack Data DownloadPass Through KEY BucrWeekly Timer Data Upload Upper digit of Chapter number Bytes Second 150 Upper digit of Chapter number Bytes 170 Upper digit of Chapter number Bytes 242 Operating Modes Weekly Timer Data Download WucrDVD VR Play Mode （DVD VR） Output SelectRepeat Mode General Purpose Parameter･･････････ Chapter Skip Title/Track Number Request Current Player Condition Request DescriptionsBlock Number Request CD/VCDTime Code Request Chapter Number Request DVDBlock Number Request CD Frame Number Request DVD Index Number Request CDTotal Frame Request DVD TOC Information RequestDisc Region Code Request DVD DVD Disc Status Request0XXXXXXXCR CD Disc Status Request0XXXXCR 1XXXX1XXCRArg Function User’s Frame Time Register a SetCD,VCD Screen display positions are pictured below 1DSCR RCR Register D SetPrint Character 1RACR RCRClear Screen Real Time Clock SetAdvanced Setup Argument Function DescriptionPlay Start Mode Title TOP Menu Remote ControlSetup Lock TrayCommunication Control Set Player Active Mode RequestMode Status 2CMCRPlayer Model Name Request Real Time Clock RequestAdvanced Setup Request Player Region Code RequestInput Number Request CCR Mode RequestError Code Request Input Unit RequestAC8C7C6C5C4C3C2C1CR Register a Request3RACR RCR Register D Request Menu Call DVD2MCCR RCR Numeric Button DVDButton Select DVD Mccr RCR2CUCR RCR Enter Button DVDEtcr RCR Argument1 Position Get Information DVDSub-ID Yyyy Return Data from the Player Hlbtnn Contents Numbers Bytes Memory Data UploadReturn Firmware Version Mucr RCROperating Modes SetupRandom Access ParkReject DVD-V8000 Internal Registers Search Time/Frame Remote Control Data RegisterSerial Use Address Flag Search Title/Track Search ChapterAudio Control Mark IndexRegisters Register Model Extend Terminal Control Function Assignment FunctionStack GROUP7 Function User Setting Right Button Down Button to select Menu Internal Registers Internal Registers Controller Simple CircuitDiode Matrix Circuit Additional Notes Appendix a Complete Command List by Name Command Supporting Formats Appendix B Complete Command List by Mnemonic Command Supporting Formats Appendix C DVD Command List CommandCommand Appendix D CD Command List Page Appendix E VCD Command List 100101 Appendix F Error Codes Appendix G Specifications of RS-232 Transceiver Parameters MIN TYP MAX Units Conditions RS-232 OutputsDVD-V8000
Related manuals
Manual 13 pages 14.94 Kb

V8000 specifications

The Pioneer V8000 is a professional-grade digital video and audio player that has gained recognition among DJs, video artists, and event organizers. This versatile device is designed to meet the growing demands of the entertainment industry, offering advanced features and cutting-edge technologies that enhance performances.

One of the standout features of the Pioneer V8000 is its support for various media formats. The device can handle multiple file types, including MPEG, AVI, and MP4, making it adaptable to different production requirements. Additionally, it supports a range of resolutions, allowing users to deliver high-quality visuals whether in intimate settings or large-scale events.

Incorporating a robust user interface, the V8000 facilitates seamless navigation. Its intuitive controls give users quick access to essential functions, enabling smooth transitions and effective playlist management. The large LCD screen displays vital information, ensuring that operators can monitor playback closely without disrupting the visual experience.

The V8000 also boasts advanced video effects and transitions, empowering users to create dynamic performances. With support for matrix switching and layering, operators can blend multiple video sources, adding depth and creativity to their work. Furthermore, the device allows the integration of real-time editing and effects processing.

Audio capabilities are equally impressive, as the V8000 is equipped with high-resolution digital audio processing. This ensures that sound quality remains pristine, critical for maintaining the energy and engagement of the audience. The ability to synchronize video and audio outputs also allows for cohesive presentations.

Connectivity is another highlight of the Pioneer V8000. It offers multiple input and output options, including composite, S-Video, and HDMI connectors. This versatility makes it easy to integrate the player into existing setups or connect it directly to projectors, screens, and sound systems.

In terms of build quality, the Pioneer V8000 is designed to withstand the rigors of professional use. Its rugged casing ensures durability while maintaining a lightweight profile that enhances portability. This makes the device suitable for on-the-go professionals who require reliability without compromising on performance.

Overall, the Pioneer V8000 is a powerful tool for professionals in the video and audio industry. With its array of features, user-friendly interface, and robust build quality, it enables users to deliver captivating performances and create memorable experiences for audiences everywhere. The V8000 stands as a testament to Pioneer’s commitment to innovation and excellence in digital media technology.
Top Page Image Contents