Pioneer PD-F19PD-F27 Disc all program, Programming a pause remote control only Pause program

Page 17

VARIOUS OPERATIONS

The following operations can only be performed during stop mode

<Programming an entire disc as one step>

(Disc all program)

If you skip step 3 of the operation example, disc 2 is programmed as step 1 .

<Programming a pause (remote control only)> (Pause program)

If you press 8 at step 4 , you can program a pause. When you press 8, “PA” appears in the display instead of the disc number.

•For example, when making a program for recording both sides of a cassette tape, press 8 to insert a pause after programming the tracks for one side. After turning the tape over, press 8 to resume recording.

Notes!!

•You cannot program a pause as the first step, nor program two pauses in a row.

•When you program a pause, it counts as 1 step and reduces the total number of tracks you can program.

•To erase a program...

Press 7 twice during playback (or once in stop mode). You can also erase the program by pressing MODE, RANDOM, PREVIOUS, or SINGLE LOADER PLAY in either play or stop mode (or by pressing BEST in stop mode).

•To cancel a program step

In stop mode, each time you press CLEAR, the last step in the program is erased.

•If a programmed disc is missing or inserted backwards during program play, “NO DISC” appears in the display, the step is automatically erased, and playback proceeds to the next step.

•Program contents are stored in memory even when the power is turned off.

•Press the TIME/CHARA twice to check the number of steps that have been programmed.

MIN SEC

This indicates the number

PROGRAM

of programmed steps.

(Memory Back-Up Function)

Memorized data will be stored in memory for approx. 1 month even if the power cord is unplugged. However, this period may be shortened somewhat, depending on the amount of memory used.

Notes!!

• If step 5 is carried out before the accumulated time is displayed, the program play starts and the time is not displayed.

•When UNLOAD is pressed while a program has been entered, the disc for the 1st program step comes on the center position and the hood opens.

•The display is not shown if the total time of the program is 100 minutes or more.

•When another PD-F27 is connected to create a 602-disc changer, only the discs loaded in one of the PD-F27's can be programmed. It is not possible to program discs from both of the PD-F27s.

•The following restrictions apply to programming when 2 PD-F27 units are connected.

•When inputting program data with the remote control unit, when the 1st disc number is P0 or between 1 and 300, program input will be on the MASTER unit. When between 301-600, program input will be on the SLAVE unit.

•Carry out programming of the SLAVE unit’s P0 using the controls on the SLAVE unit.

•When programs are input on both the MASTER unit and SLAVE unit, program playback will start from the unit that PLAY is pressed on. After playback has finished, pressing PLAY on the other unit will start playback on that unit.

(RELAY PROGRAM play is not possible.)

When PLAY is pressed on the remote control unit, the program on the MASTER unit will playback.

OPERATING

BEFORE

 

 

 

 

OPERATIONS

BASIC

 

 

OPERATIONS

VARIOUS

 

 

 

 

 

 

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents PD-F27 Not Expose this Appliance to Rain or Moisture Important NoticeContents HERE’S What YOU can do Before YOU USE the PlayerCleaning the player Precautions regarding installationCD lens cleaner Cleaning and handling compact discsConnections Connecting to the Digital OUT JackMaking connections CDDeck synchro functionConnecting another PD-F27 Connecting a keyboardFront Panel Names of PartsDisplay Stop buttonNames of Parts Remote Control UnitRemote Control Operations To remove the discs Loading discs into the rackBasic Operations To select a play modeTo listen in order from the first track To select the disc and trackTo play a track you want to hear Playing a disc that is not loaded in the rackTo start playback from a specific disc Opening or closing the hood during playbackVarious Operations Mode ClearTIME/CHARA ModeTo store your favorite tracks Best play To repeat playback Repeat playVarious Operations Best RepeatPrevious To playback tracks/discs at random Random playVarious Operations Random Various Operations Clear To program tracks/discs in a desired order Program playTo cancel a program step Programming a pause remote control only Pause programDisc all program To erase a programVarious Operations TIME/CHARA HI-LITE To scan quickly through tracks on a disc HI-LITE scanTo use the TIME/CHARA button Various Operations TIME/CHARA Title InputTITLE/INPUT InputTIME/CHARA 8 TITLE/INPUT Digit keys Correcting a title that has already been input Input title of Custom groupsEnter TITLE/INPUT Cursor Clear TITLE/INPUTFinding the desired CD by the disc title or artist’s name Displaying titles or artist’s nameTITLE/DISPLAY TITLE/SEARCHSELF-DIAGNOSTICS Function TroubleshootingSymptom Cause Remedy Display on the unitAccessories SpecificationsPOWER-CORD Caution GeneralPage Operations Pioneer Corporation

PD-F19PD-F27 specifications

The Pioneer PD-F19 and PD-F27 are notable members of the Pioneer CD player lineup, well-regarded for their reliability and robust performance. These models are designed to cater to audiophiles who appreciate quality audio reproduction and user-friendly features.

The PD-F19 is recognized for its innovative Multi-CD carousel design, allowing users to load up to 6 CDs at once. This feature not only enhances convenience but also ensures that listeners can enjoy extended playback without interruption. The unit supports a variety of disc formats, including CD-DA, CD-R, and CD-RW, making it versatile for different music collections.

The PD-F27 takes this convenience a step further by integrating advanced digital processing technologies. It features a high-quality 1-bit DAC (Digital-to-Analog Converter), which significantly reduces distortion and improves audio clarity. This technology ensures that the sound quality is crisp and detailed, allowing users to appreciate the nuances in their favorite tracks.

Both models include direct track access and programmable playback options, giving users greater control over their listening experience. The PD-F27 is equipped with a more sophisticated remote control, offering additional functionalities for ease of use. The inclusion of a large, informative display on both models provides essential information at a glance, such as track number, elapsed time, and remaining time.

Additional features of the PD-F27 include a seamless repeat function, which caters to those who want to listen to specific tracks or albums on loop. The anti-vibration chassis design is another critical characteristic that contributes to sound quality by minimizing unwanted resonances and enhancing playback stability.

In terms of connectivity, both models come with analog outputs, allowing users to connect to a variety of audio systems easily. The PD-F27 may also offer digital outputs, enabling connection to external DACs and modern audio equipment, further enhancing versatility.

Overall, the Pioneer PD-F19 and PD-F27 CD players exemplify the brand's commitment to superior sound quality and user-centric design. With their unique features and robust performance, they remain valued choices for enthusiasts looking to enrich their audio experience.
Top Page Image Contents