Pioneer DV-600AV-S Cannot output 192kHz or, 176.4kHz digital audio, Super VCD disc is not

Page 56

09Additional information

Problem

Remedy

Cannot play multi-

• Make sure that Audio Output Mode is set to 5.1 Channel

channel audio.

(page 45).

 

• Check that the Dolby Digital, DTS and MPEG Out settings (page 39)

 

are suitable for your amplifier/receiver—check the instruction manual

 

that came with your amplifier/receiver.

 

• DVD-Audio and SACDs do not output multichannel digital audio.

 

Listen through the player’s analog outputs.

 

• Check that the settings in the Speaker Installation screen are correct

 

(page 50).

 

• Check the audio options available from the disc menu.

Cannot listen to high- sampling rate audio through the digital output.

•Make sure that Linear PCM Out/96 kHz PCM Out is set to Down Sample Off/96 kHz (page 39).

•As a copy-protection measure, some DVDs do not output 96kHz audio. In this case, even if set to Down Sample Off/96 kHz, the player automatically outputs the audio at 48 kHz. This is not a malfunction.

Cannot output 192kHz or

• The player does not output digital audio at these sampling rates. The

176.4kHz digital audio.

digital output is automatically downsampled.

 

 

Cannot output 96kHz or

• Check that Linear PCM Out/96 kHz PCM Out is set to Down

88.2kHz digital audio.

Sample Off/96 kHz (page 39).

 

• Some discs are digital copy protected and do not output high

 

sampling rate digital audio. In this case the output is automatically

 

downsampled.

No DTS audio output. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to DTS > PCM (page 39). If you do not do this, noise will be output when you play a DTS disc.

•If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier settings, and that the cable is properly connected.

Audio mix does not sound right or sounds incomplete (for example, inaudible dialog).

•Make sure that Audio Output Mode is set to 2 Channel if you've connected to the stereo inputs on your amplifier or TV (page 47).

The audio recorded on a • If the audio is switched to [2] when playing a Super VCD that

Super VCD disc is not

contains only one stereo soundtrack, there may be no sound at all.

output properly.

Press AUDIO to change the soundtrack.

 

 

Can’t hear effect of

• Virtual Surround does not work with SACD or DVD-Audio.

Virtual Surround.

• The Virtual Surround effect is only output through the AUDIO OUT

 

(2ch) analog audio outputs.

 

• Make sure that Audio Output Mode is set to 2 Channel (page 45).

 

• The effectiveness of Virtual Surround varies with the disc.

 

 

56

En

Page 55 Page 57
Image 56
Page 55 Page 57
Contents DV-600AV-SDV-400V-S Operating Environment Risk of Electric Shock Do not OpenVentilation Caution Contents Before you start Chapter FeaturesBefore you start Before you start What’s in the boxPutting the batteries in the remote 24-bit/192 kHz compatible DACHints on installation Disc/content format playback compatibilityCD-R/-RW compatibility DVD+R/DVD+RW compatibilityDVD-R/-RW compatibility Compressed audio compatibilityWMA Windows Media Audio compatibility About DivX videoDivX video compatibility About WMVJpeg file compatibility PC-created disc compatibilityConnections Connections ChapterEasy connections To audio/video inputsConnections Connecting using a Scart AV cable Connecting using the S-video outputConnections Connecting using the component video output To InterlaceTip Connections Connecting to an AV receiverConnecting the multichannel analog outputs Connections Connecting using HdmiConnecting the digital output About Hdmi To 576P/480PFront panel Controls and displaysControls and displays Chapter Controls and displays Remote control Using the remote controlSwitching on Using the on-screen displaysGetting started Getting started ChapterGetting started Setting up the player for your Setting the language of this player’s on-screen displaysPress play to start playback Getting started Playing discsPress OPEN/CLOSE to open the disc tray Load a disc Getting started Basic playback controlsResume and Last Memory NumbersDVD-Video and DivX disc menus ReturnWhy won’t the disc I loaded play? Video CD/Super VCD PBC menusDisc may have been illegally copied Playing discs Playing discs ChapterScanning discs Playing in slow motionPlaying discs Viewing a Jpeg slideshow Select a view optionSelect the thumbnail image for what you want to play Use the cursor buttons Enter to navigateUsing repeat play Looping a section of a discTo resume normal playback, select ‘Off’ from the menu Select a repeat play optionSelect a random play option Using random playCreating a program list To play the program list, press play Other functions available from the program menuRepeat to build up a program List Switching subtitles Select a search modePlaying discs Searching a disc Press Subtitle repeatedly to select a subtitle optionUse the cursor buttons to change the zoomed area Playing discs Switching audio language/ channelsZooming the screen Displaying disc information Playing discs Switching camera anglesDuring playback, press Angle to switch angle USB playback Chapter Using the USB interfaceUSB playback Audio Settings and Video Adjust menus Audio Settings and Video Adjust menus ChapterAudio Settings menu Audio DRCAudio Settings and Video Adjust menus Video Adjust menuMake settings using Cursor buttons, and Enter EqualizerUsing the Initial Settings menu Initial Settings menuInitial Settings menu Chapter Initial Settings menu Digital Audio Out settings Initial Settings menu Video Output settings Initial Settings menu Language settings Display settingsParental Lock Initial Settings menu Options settingsRegistering a new password Initial Settings menu Changing your passwordSetting/changing the Parental Lock Setting/changing the Country/Area codeAbout DivX VOD content Playing DivX VOD contentDisplaying your DivX VOD registration code Select ‘Display’Initial Settings menu Speakers settings Audio Output ModeAbout the audio output settings DTS CDInitial Settings menu About the Hdmi audio output settings DV-600AVSacd Speaker Distance UseSpeaker distance for the highlighted Speaker Use Cursor up/down to Change the distanceSpeaker Installation Default settings L/R Large C Large SL SR LargeSW OnTo change the current setting Use the cursor up/down buttons to select a speakerTaking care of your player and discs Additional informationAdditional information Chapter Additional information Screen sizes and disc formatsDVD-Video regions Additional information Setting the TV systemResetting the player Disc won’t play or is automatically ejected after loading TroubleshootingSelect ‘Other Language’ Settings are canceled Remote controlDVD and CD volume Malfunction Doesnt seem to workCannot output 192kHz or 176.4kHz digital audioSuper VCD disc is not Output properlyHdmi troubleshooting USB troubleshooting Additional information Glossary DivXWMA Country/Area, Country/Area code, Country/Area code letter Additional information Language code listCountry/Area code list Additional information Specifications AV Connector 21-pin connector assignmentAccessories Pioneer Corporation

DV-600AV-S specifications

The Pioneer DV-600AV-S is an exceptional multi-format DVD player that combines versatile playback capabilities with advanced technological features, making it a popular choice for home theater enthusiasts. This player showcases a sleek, stylish design that fits seamlessly into any entertainment system while providing exceptional audio and video performance.

One of the standout features of the DV-600AV-S is its ability to play a wide variety of disc formats. It supports DVD-Video, DVD-R/RW, DVD+R/RW, VCD, SVCD, Audio CD, and even CD-R/RW discs. This versatility allows users to enjoy a range of content, including movies, music, and personal recordings, without the need for multiple devices.

In terms of video quality, the Pioneer DV-600AV-S incorporates advanced technologies such as Progressive Scan, which enhances the clarity and detail of video playback. This feature is especially beneficial for those with compatible televisions, as it reduces motion blur and provides a smoother image. Additionally, the player supports various video output formats, including composite, S-Video, and component outputs, allowing users to connect to a variety of display options.

On the audio front, the DV-600AV-S excels in delivering high-quality sound. It features a built-in Dolby Digital decoder, ensuring that users can enjoy a rich and immersive audio experience with surround sound. Furthermore, the player is compatible with a wide range of audio formats, including MP3 and WMA files, enabling users to experience their favorite music with pristine quality.

Another significant characteristic of the DV-600AV-S is its user-friendly interface and remote control, making navigation effortless. The player includes features such as multi-angle viewing and subtitle options, enhancing the viewing experience by providing viewers with greater control over their media.

For those who enjoy digital content, the Pioneer DV-600AV-S also includes a USB port, allowing users to connect USB flash drives to access music and video files directly, expanding its functionality further.

In conclusion, the Pioneer DV-600AV-S is a versatile, high-quality DVD player that caters to diverse media needs. With its range of supported formats, advanced video and audio technologies, and user-friendly features, it remains a valuable addition to any home entertainment setup, delivering impressive performance that enhances the overall viewing experience.
Top Page Image Contents