Pioneer DV-610AV-K Basic playback controls, Resume and Last Memory, Button What it does,  Play

Basic playback controls

The table below shows the basic controls on the remote for playing discs. The following chapter covers other playback features in more detail.

Button	What it does
 PLAY	Starts playback.
	If the display shows RESUME
	or LAST MEM playback starts
	from the resume or last
	memory point (see also
	Resume and Last Memory
	below.)

PAUSE Pauses a disc that’s playing, or restarts a paused disc.

 STOP	Stops playback.
	See also Resume and Last
	Memory below.

Press to start fast reverse

(remote only) scanning. Press  PLAY to resume normal playback.

Press to start fast forward

(remote only) scanning. Press  PLAY to resume normal playback.

PREV Skips to the start of the current track, title or chapter, then to previous tracks/titles/chapters.

NEXT Skips to the next track, title or chapter.

Numbers Use to enter a title/chapter/ (remote only) track number. Press ENTER to

select.

•If the disc is stopped, playback starts from the selected title (for DVD), group (DVD-Audio) or track (for CD/ Video CD/Super VCD).

•If the disc is playing, playback jumps to the start of the selected title (VR mode DVD-RW), chapter (DVD-Video) or track (DVD-Audio*/SACD/ CD/Video CD/Super VCD). *within the current group

Resume and Last Memory 04

With the exception of DVD-Audio and SACD discs, when you stop playback of a DVD, CD, or Video CD/Super VCD or DivX video/WMV discs, RESUME is shown in the display indicating that you can resume playback again from that point.

If the disc tray is not opened, the next time you start playback the display shows RESUME and playback resumes from the resume point. (If you want to clear the resume point, press

STOP while RESUME is displayed.)

With DVDs and Video CD/Super VCDs, if you take the disc out of the player after stopping playback, the last play position is stored in memory. If the next disc you load is the same one, the display shows LAST MEM and playback will resume. For DVD-Video discs, the player stores the play position of the last five discs. When one of these discs is next loaded, you can resume playback.

Note

•The Last Memory function doesn’t work with VR format DVD-R/-RW, DVD-Audio or SACD discs.

•If you don’t need the Last Memory function when you stop a disc, you can press

 OPEN/CLOSE to stop playback and open the disc tray.

21

En