Pioneer DV-400-S Additional Information Taking care of your player and discs, Handling discs

Page 50

09Additional Information

Taking care of your player and discs

Handling discs

When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge.

Damaged or dirty discs can affect playback performance. Take care also not to scratch the label side of the disc. Although not as fragile as the recorded side, scratches can still result in a disc becoming unusable.

Should a disc become marked with finger- prints, dust, etc., clean using a soft, dry cloth, wiping the disc lightly from the center to the outside edge as shown in the diagram below.

Wipe lightly from the center of the disc using straight strokes.

Don’t wipe the disc surface using circular strokes.

If necessary, use a cloth soaked in alcohol, or a commercially available CD/DVD cleaning kit to clean a disc more thoroughly. Never use benzine, thinner or other cleaning agents, including products designed for cleaning vinyl records.

50

Storing discs

Although CDs and DVD discs are more durable than vinyl records, you should still take care to handle and store discs correctly. When you're not using a disc, return it to its case and store upright. Avoid leaving discs in excessively cold, humid, or hot environ- ments (including under direct sunlight).

Don't glue paper or put stickers onto the disc, or use a pencil, ball-point pen or other sharp-tipped writing instrument. These could all damage the disc.

For more detailed care information see the instructions that come with discs.

Do not load more than one disc into the player at a time.

Discs to avoid

Discs spin at high speed inside the player. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don't risk using it in your player—you could end up damaging the unit.

This unit is designed for use with conven- tional, fully circular discs only. Use of shaped discs is not recommended for this product. Pioneer disclaims all liability arising in connection with the use of shaped discs.

Cleaning the unit’s exterior

Use a polishing cloth or dry cloth to wipe off dust and dirt. If the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth.

En

Image 50
Contents DV-400-S On the top of the player Risk of Electric Shock Do not OpenH017BEn Contents Thank you for buying this Pioneer productSetting the TV system Except Taiwanese Setting/changing the Country CodeBefore You Start Features 24-bit/192kHz compatible DACBefore You Start What’s in the box Putting the batteries in the remote controlUsing the remote control DVD-Audio, SACD, DVD-RAM DVD-ROM, CD-ROMBefore You Start PC Created Disc CompatibilityConnecting Up Rear panel connections Connecting Up Easy connections Connecting using an S-Video output Connecting UpUsing other types of video output Connecting using the component video outputConnecting to an AV receiver Taiwanese model only Connecting using the D1 video outputAudio OPEN/CLOSE Controls and Displays Front panelSTANDBY/ON Controls and Displays Audio Controls and Displays Remote controlSetup Subtitle14 0 OPEN/CLOSE Play ModeSurround AngleGetting Started Switching on Let’s Get StartedPress Enter to move on to the next Press Enter again to finish setting upGetting Started ScreenSelect ‘Setup Navigator’ Getting Started Using the on-screen displaysSetting up with the Setup Navigator Select a DVD language Press 0 OPEN/CLOSE to open the disc tray Congratulations, setup is completePlaying discs Load a disc Press 3 play to start playbackDVD-Video disc menus Basic playback controlsFront panel controls Stops playbackVideo CD/Super VCD PBC menus NumbersUsing the Disc Navigator to browse the contents of a disc Playing Discs IntroductionTo resume normal playback, press Play Scanning discsPlaying in slow motion Press repeatedly to change the slow motion speedPress Enter on ‘AStart Point’ to set the loop start point Playing Discs Frame advance/frame reverseLooping a section of a disc Press Enter on ‘BEnd Point’ to set the loop end pointDisc Repeat or Track Repeat or Repeat Off Playing Discs Using repeat playFor CDs and Video CD/Super VCDs, select Select a repeat play optionSelect a random play option Playing Discs Using random playCreating a program list Select ‘Create/Edit’ from the list of program options To add a title, select the titleRepeat to build up a program List Editing a program listOther functions available from the program menu To play the program list, press PlayPress Enter to start playback Searching a discSelect a program play function Create/Edit See above Switching audio channel when playing a Video CD/ Super VCD Switching subtitlesSwitching DVD audio language Zooming the screenDisplaying disc information Switching camera anglesDuring playback or when paused, press Angle to switch angle Use the cursor buttons to change the zoomed areaAudio Settings Menu Audio DRC Virtual SurroundAudio Settings Menu Digital Out Initial Settings Menu Using the Initial Settings menuDigital Audio Out settings Dolby Digital Out96kHz PCM Out Initial Settings MenuDTS Out Mpeg OutDefault setting S2 Initial Settings Menu Video Output settingsDefault setting 43 Letter Box TV ScreenAudio Language Initial Settings Menu Language settingsDefault setting English Subtitle LanguageSubtitle Display Display settingsDVD Menu Language OSD LanguageUse the number buttons to enter a 4- digit password Angle IndicatorSelect ‘Password’ OptionsUse number buttons to enter your password, then press Enter Select ‘Password Change’Enter a new password Numbers appear as asterisks as you enter themThere are two ways you can do this You may also want to refer to the Country code list onSelect a new level Select a country code Select ‘Country Code’PhotoViewer Photo Viewer Press Menu to display the Photo Browser screen Using the Jpeg Photo BrowserViewing Jpeg Discs Playing Jpeg discs You can change the zoom factor and the zoomed area freely Viewing Jpeg Discs Zooming the screenUse the cursor buttons / / / to change the zoomed area To resume the slideshow, press PlayHandling discs Cleaning the unit’s exteriorAdditional Information Taking care of your player and discs Storing discsAdditional Information Widescreen TV users Resetting the playerAdditional Information Screen sizes and disc formats Standard TV usersCDs and Video CD/Super VCDs are divided into tracks Additional Information Titles, chapters and tracksDVD-Video regions Language Language code letter, Language code Additional Information Language code listCountry code list Country, Country code, Country code letterAspect ratio GlossaryAnalog audio Digital audioJpeg MP3Auto = Ntsc Ntsc = PAL PAL = Auto Additional Information Setting the TV systemWatching Ntsc on a PAL TV MOD. PAL MOD.PALPress Enter Additional Information Taiwanese model onlyChanging the on-screen dis Play language to English Additional Information Specifications GeneralPioneer Corporation TFJZZ/02I00001 Printed

DV-400-S specifications

The Pioneer DV-400-S is a versatile and compact DVD player that showcases Pioneer's dedication to high-quality audio and video performance. This model, acclaimed for its user-friendly operation, integrates advanced technology while maintaining a sleek design that fits seamlessly into any home entertainment setup.

One of the standout features of the DV-400-S is its capability to play a wide range of disc formats, including DVD, DVD-R/RW, CD, and CD-R/RW, making it an excellent all-in-one player for various media. The player is also compatible with MP3 and JPEG format files, enabling users to enjoy their favorite music and photos directly on the TV.

An important technology that enhances the DV-400-S is the use of Progressive Scan, which ensures that video playback is smooth and clear. This feature allows for improved image quality, minimizing motion blur and enhancing overall visual clarity, especially during fast-paced scenes. The player offers a resolution of 720p, ensuring an immersive viewing experience whether you're watching movies or your favorite television shows.

The DV-400-S also implements Pioneer's advanced audio technology. With its built-in Dolby Digital and DTS decoding, users can experience high-quality surround sound that brings movies and music to life. The player features multiple audio outputs, including an optical output, that ensures compatibility with various home theater systems for expanded audio options.

Another notable characteristic of the DV-400-S is its ease of use. The device comes with a straightforward remote control that provides access to all major functions, enabling effortless navigation through menus and media. It is designed not only for functionality but also for efficient energy consumption, meeting various environmental standards that align with modern consumer needs.

In addition to its physical attributes and technology, the DV-400-S is praised for its reliability and durability. This means users can expect a long-lasting investment in their home entertainment system, with the assurance that the player will continue to deliver quality performance over the long term.

Overall, the Pioneer DV-400-S is an excellent choice for those seeking a reliable and capable DVD player. Its blend of format compatibility, advanced audio and video technologies, and user-friendly interface solidify its place as a valuable addition to any entertainment setup.