Initial Settings menu | 07 |
Setting | Option | What it means |
DTS Out | DTS | DTS encoded digital audio is output when playing a DTS disc. |
|
| (Noise will be output if your amplifier/receiver is not compatible |
|
| with DTS audio.) |
|
|
|
| Off | No digital audio is output when playing a DTS disc. |
|
|
|
96 kHz PCM Out | 96kHz > 48kHz | 96 kHz digital audio is converted to 48 kHz for digital output. |
|
|
|
| 96kHz | 96 kHz digital audio is output as is at 96 kHz. |
|
|
|
MPEG Out | MPEG > PCM | MPEG encoded digital audio is converted to PCM audio for |
|
| digital output. |
|
|
|
| MPEG | MPEG encoded digital audio is output as is. |
|
|
|
HDMI Out* | LPCM (2 ch) | Set if your monitor or device only accepts stereo input. On this |
* |
| setting multichannel audio is downmixed to 2 channels for |
|
| stereo linear PCM output. (In case of DTS source, the HDMI |
|
| audio output is turned off.) |
|
|
|
| Auto | Dolby Digital, DTS and MPEG sources are processed |
|
| according to how they were encoded, but if your amplifire/ |
|
| monitor is not compatible with DTS audio, DTS audio output |
|
| from HDMI is turned off. Linear PCM sources are heard as is. |
|
|
|
| Off | No digital audio output. |
|
|
|
Video Output settings
Setting | Option | What it means | |
TV Screen | 4:3 (Letter Box) | Set if you have a conventional 4:3 TV. Widescreen movies are | |
(This setting effective for |
| shown with black bars top and bottom. | |
analog and HDMI video |
|
| |
4:3 (Pan & Scan) | Set if you have a conventional 4:3 TV. Widescreen movies are | ||
output. See also Screen | |||
sizes and disc formats |
| shown with the sides cropped so that the image fills the screen. | |
on page 41.) |
|
| |
16:9 (Wide) | Set if you have a widescreen TV. | ||
| |||
|
|
| |
Component Out | Interlace | Set if your TV is not compatible with progressive scan video. | |
|
|
| |
| Progressive | Set if your TV is compatible with progressive scan video (see | |
|
| your TV’s instruction manual for details). See also Switching | |
|
| the video output to interlace using the front panel controls on | |
|
| page 13. | |
|
| Note that progressive scan video is only output from the | |
|
| component video jacks and that there is no output from the | |
|
| composite and | |
|
|
|
35
En