COBY electronic TF-DVD5050 important safety instructions Setup Menu, Osd, Audio, Second

	Function Buttons
Subtitle
Sub-	While playing a DVD disc that contains multiple subtitles, press the SUBTITLE button
	repeatedly to select the desired language of the viewable subtitle.
Title
	A DVD disc may contain up to 32 selectable subtitles.

The default SUBTITLE language is ENGLISH.

Function Buttons

Program

To play a disc in a desired sequence.

NOTE: The Program function is available just as the player is in Navigate Off mode. Press the PBC button to set Navigate Off.

Pro-
gram	Press the Program button to enter the program menu.

	Setup Menu
Various features of the DVD player can be adjusted in the Setup Menu.
1.	Press the SETUP button.
	Then the SETUP menu appears on screen.
2.	Press the UP/DOWN button to highlight the desired
	Sub-menu.
3.	Press ENTER to confirm your selection.
4.	Press the LEFT button to return to upper menu level.

Setup Menu

16:9 (Wide Screen): This is selected when the unit is connected to a wide-screen TV. The default setting is 4:3 LB

NOTE: Certain DVD discs are formatted in wide screen (16:9) or letter box (4:3) only. Adjusting the setting of the disc player will not change the screen size for these "Format-only" discs.

2. Screen Saver

Press the UP/DOWN button to shift between Screen Saver ON and OFF. And press ENTER to

NOTE:

In some cases, the subtitle language is not changed to the selected one immediately.

When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap each other on the TV screen. In this case, turn the subtitle OFF.

When the desired language is not selected even after pressing the button several times, it means that the language is not available on the disc.

CLEAR

Press the Clear button to cancel the incorrect input in DVD program .

Clear

SEARCH

Go to a desired section. (A desired Title, Chapter, Time)

Playing DVD

Search Search by Title/Chapter

a). Press the SEARCH button once,below picture appears:

In DVD mode

a. When the Program menu appears, move the cursor to highlight the title column by LEFT/RIGHT button, select the Title by UP/DOWN button and press ENTER. Or input the title number by the numeric keypad.

b. Move the cursor to highlight the chapter column by LEFT/RIGHT button,select the Chapter by UP/DOWN button and press ENTER. Or input the chapter number by the numeric key pad directly.

c. Repeat step a to b to set up to 20 titles for the programming playback.

d. Press PLAY to start playing the programmed titles.

In CD mode

a. When the Program menu appears, move the cursor to highlight the column by LEFT/RIGHT button, select the Track by UP/DOWN button and press ENTER.

b. Repeat Step a to set up to 20 tracks for the programming playback. c. Press PLAY to start playing the programmed tracks.

Title Chapter

TRACK

5. To exit from the setup menu, press SETUP once more.

Or press UP/DOWN to select the EXIT menu.

:Move :Select SETUP:Out

NOTE:

Make sure your player is in STOP mode before setting the SETUP menu, otherwise some setup features will be unavailable.

--Language Setup--

Press the UP/DOWN button to highlight the desired item from OSD/Menu/Audio/Subtitle, and press ENTER to confirm.

Item	Instruction	Default setting
	To select the language of the OSD by the UP/DOWN button,
OSD	and press ENTER to confirm.	English
	There are four options: English, French, German, Spanish.
Menu	To select the language of the Menu by the UP/DOWN	English
	button, and press ENTER to confirm.
Audio	To select the language of the audio sound track by the	English
	UP/DOWN button, and press ENTER to confirm.
	Select the language of the subtitle by the UP/DOWN button

confirm.

The default setting is On.

The screen saver is useful to prevent your display from becoming damaged.

If the Screen Saver is set ON, the screen saver picture appears when you leave the DVD player in

stop mode for about a few minutes. Press any button on main unit or remote control to exit from the

screen saver.

Automatic power off function

After the screen saver has been engaged for about a few minutes, the DVD player will automatically

turn itself off, except during CD playback.

3. TV System

Press the UP/DOWN button to select the TV System from NTSC/PAL/AUTO, and press ENTER to

confirm. The default setting is NTSC.

(The TV System for north America is NTSC. Auto should only be used if you have a Multi-System

TV.)

4. Brightness

Press the UP/DOWN button to select your satisfied brightness effect from Normal/Bright/Soft. And

b). Press the LEFT/RIGHT direction button to highlight the entry. c). Input the desired title/chapter by numeric keys.

d). Press the ENTER button to execute search. f ). To exit, press SEARCH again.

Search by Time

a). Press the SEARCH button twice, below picture appears:

In MP3 mode			DIR 001	1	FILE 001	1
		button			FILE 002	2
a. When the Program menu appears, Press the			DIR 002	2
to select the folder, use the ENTER button to confirm.					FILE 003	3
			DIR 003	3
b. Highlight the desired track by the	button, and press				FILE 004	4
			DIR 004	4
the RIGHT button to select it. (The tracks to be programmed					FILE 005	5
			DIR 005	5
playback can be in different folders. Press the LEFT button
to return to the folder menu).

	Subtitle	and press ENTER to confirm.	English
		When OFF is selected, the subtitle will not be displayed.
--Screen Setup--
Press the UP/DOWN button to highlight the desired item from TV Type/Screen Saver/TV System/
Brightness/ Contrast, and press ENTER to confirm.

press ENTER to confirm.

The default setting is Normal.

5. Contrast

Press the UP/DOWN button to select your satisfied contrast ratio from -4, -3, -2, -1, 0, 1, 2, 3 and

4. And press ENTER to confirm.

The default setting is 0.

0 03 30 Second

Minute

Hour

b). Input Second, Minute and Hour information by the numeric keys c). Press the ENTER button to execute the search.

d). To cancel the incorrect information you have input, press the Clear button. e). To exit , press SEARCH again.

Playing CD

Search by Time

a). Press the SEARCH button once, below picture appears:

c. Repeat Step a to b to select the tracks you wish to play.

d. Press PLAY to start playing the programmed tracks.

For your reference:

To cancel the incorrect input information, press the Clear button.

For MP3 mode, press right direction button twice to cancel unwanted selection. Press Program again to quit the program menu.

Under program playing, press the Program twice to resume normal playback.

NOTE: Some discs do not allow program setting.

SETUP

:Move :Select SETUP:Out

1. TV Type

Press the UP/DOWN button to select the aspect ratio from 4:3 PS (Pan Scan); 4:3 LB (Letter Box);

16:9 (Wide Screen). And press ENTER to confirm.

--Audio Setup--

Audio Setup
Digital out
:Move	:Select SETUP:Out

a. When the Digital Out is highlighted, press ENTER to confirm.

b. Press UP/DOWN to select Digital Out from SPDIF/PCM, SPDIF/RAW, and OFF. And press ENTER to confirm.

The default setting is SPDIF/RAW.

Hour	0	03	30	Second
	Minute

b). Input Second, Minute and Hour information by the numeric keypad.

c). To cancel the incorrect input, press the Clear button. To execute the search, press ENTER. d). To exit , press SEARCH again.

.13.

Press the SETUP button to enter the player's setup menu.

Setup The SETUP menu allows the viewer to adjust the setting details of the DVD player.

Please read the "Setup Menu" of the manual for further directions on how to use the SETUP menu.

.14.

4:3 LB (Letter Box): This is selected when the unit is connected to a normal TV. Wide-screen

images are shown on screen, with black belt on the top and bottom.

4:3 PS (Pan Scan): This is selected when the unit is connected to a normal TV. Wide-screen images

are shown on screen, with some parts cut automatically.

.15.

NOTE: When Digital Out is NOT in use, it is recommended to turn OFF the digital output setting, for the purpose of minimizing the circuit interference.

SPDIF/RAW: When this item is selected, all digital coaxial and optical outputs are turned on and are able to output a Dolby Digital signal.

.16.