COBY electronic DVD-53 instruction manual Audio Connections, Channel Stereo, TV with AV Input

CONNECTIONS

Audio Connections

Use one of the following connections only to avoid signal interference:

1.2-Channel Stereo Audio Out

2.5.1-Channel Surround Audio Out (requires a surround sound amplifier)

3.Coaxial Digital Audio Out (requires a digital decoding amplifier)

4.Optical Digital Audio Out (requires a digital decoding amplifier)

2-Channel Stereo

The DVD player is equipped with 2-channel RCA Stereo Audio outputs located on the rear panel (L, R). Connect the player’s audio outputs to a stereo TV (or optionally, a stereo amplifier).

TV with AV Input

Component, Composite, or

S-Video Connection

To L/R Audio Input of Stereo TV

2-Channel Audio

2-Channel

Stereo Amplifier

To L/R Audio Input of Stereo Amplifier (optional)

If a stereo amplifier is used, it should be set to the output mode that corresponds to the DVD player. Refer to the amplifier’s user guide for help.

Page 18 Coby Electronics Corporation