Basic Operations

1.Prepare the power supply.

Set the Power Switch to the ON position to turn the player on.

2.Load a disc.

Press the Open/Close button to open the disc tray. Insert a disc with the label-side up. Press the Open/Close button again to close the disc tray.

•If a single-sided disc is inserted upside-down, the player will display “NO DISC” or

“BAD DISC”.

3.Start playback.

Press PLAY to start playback (some discs may start playing automatically).

•Press to play the disc for the first time.

•Press during playback to pause. Press again to resume playback.

•Press during playback to stop the disc (“Pre-Stop”). Press to resume playback at the time-point at which the disc was stopped.

•Press when the disc is “Pre-Stopped” to stop playback completely. (When is pressed, the disc will start playing from the beginning.)

•Press to skip to the next track (DVD, CD, etc).

•Press to return to the previous track (DVD, CD, etc).

Normal

x16

x32

•Press to change the rate of forward playback. Each successive press of will change the rate of forward playback.

•Press to change the rate of reverse playback through the disc. Each successive press of will change the rate of reverse playback.

Normal

x1/2

x1/4

x1/8

x1/16 x1/32

•Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate of slow-motion playback. Press to resume normal playback.

•Press STEP frame-by-frame playback. Each successive press of STEP will advance the video one frame. Press to resume normal playback.

Note:

Audio will be muted during fast-forward, fast-reverse, and slow-motion playback.