COBY electronic DVD-283 instruction manual Setup, Language Settings, Display Settings

SETUP

Enter Setup mode to adjust the various internal settings of the player. Make sure the player has been completely stopped before entering Setup mode.

1. Press SETUP to enter Setup mode.

2. Use the Navigation Keypad to select a desired item.

3.Press to confirm a selection.

4.Press SETUP to exit Setup mode (or select EXIT

and press ).

Language Settings

Use the Navigation Keypad to highlight the desired language selection and press to confirm.

Item	Description	Default Setting
OSD	Sets the language of the player’s on-screen	English
	display.
Disc Menu	Sets the default menu language of loaded DVDs.	English
Audio	Sets the default language audio track of loaded	English
	DVDs.
Subtitle	Sets the default subtitle track of loaded DVDs.	English
Display Settings
Use the Navigation Keypad to highlight the desired display selection and press		to confirm.
Item	Description	Default Setting
	Sets the aspect ratio of the display. 4:3 is used
TV Display	with standard television displays; 16:9 is used	4:3L-Box (Letterbox)
	with widescreen television displays.
	Sets the player’s Video Out signal type. Set this
TV System	to correspond with your TV’s Video System type.	NTSC
	NTSC is the standard used in North America.
	Sets your player’s video output mode. Set this to
	correspond with the type of connection used with
Video Out	your TV.	S-Video+CVBS
	S-Video+CVBS: S-Video or Composite Video
	P-Scan: Component Video (Progressive Scan)
	YUV: Component Video
HDMI Video	Sets the HDMI video output mode. HDMI Video	Auto
	must be enabled for DVD upconversion.
	Displays an on-screen prompt whenever an alter-
Angle Mark	nate angle becomes available for viewing (press	On
	ANGLE to view).

www.cobyusa.com Page 27