Blaupunkt DVD-ME3 DVD Player Operations, Step, When a disc is loaded, When a disc is not loaded

7. DVD Player Operations

❋After connection to the system is completed according to Chapter 6, check the operation by using the following steps.

STEP 1:

Press the POWER button. Starting logo is then displayed on the screen.

7-1. TV Operation (DVD-ME3 only)

STEP 1:

With Power "ON", press "DVD/TUNER/AUX" button one time from DVD Mode, TV Channel "2" is displayed as default value.

ENGLISH

When a disc is loaded	STEP 2:
DISC LOADING	You may select TV Channel by pressing "CH"
	up & down button or Number key of Remote
	Controller.
	Ex): How to use Number key
	To watch CH "15", press No. 1 and 5
	each. It will display CH "15". To watch
When a disc is not loaded	Ch "4", press No. 4 only or press "0"
	and "4" each. (The Maximum TV
	Channel supported is up to CH 69)
NO DISC	STEP 3:
	While watching TV, to get the TV channel
	number displayed on the screen, please press
	"display" button one time. If pressed again,
	Channel No. will disappear. (However
	Channel No. is displayed on the Unit)

STEP 2:

Insert a disc, the player identifies disc type automatically and disc type will be displayed in the left top of TV screen. It will automatically start to play.

STEP 3:

If the power button of the unit or remote controller is pressed, the unit converts to stand-by Mode (Blue LED "ON"). If the power button is pressed again, the power turns on (Blue LED "off") and the unit starts to play (Blue LCD of window "ON").

STEP 4:

To change mode from TV, please press "DVD/TUNER/AUX" button again. The Mode will be displayed DVD > TV > AUX AV.

❋If TV signal is too low to watch, The screen shall display Mute screen with the text of "Weak TV signal...."

❋To watch other program or play game, please press "DVD/TUNER/AUX" button one more time from "TV" Mode.

Caution

•Do not insert a 3.1" (80mm) disc. This unit is not designed for 80mm discs.

14