Cambridge Audio 70 manual Connection to a Progressive Scan TV/DISPLAY, DVD77 Only

70 Series

CONNECTION TO A PROGRESSIVE SCAN TV/DISPLAY

Some televisions and monitors are equipped with component video inputs and are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view higher quality pictures with less flicker.

DVD77 Only

If you find that you have no display but are getting sound from your speakers, you have set the DVD player to progressive scan mode. Simply press the I-Scan button on your remote control.

Y Pr Pb

Rear Panel

Audio In

Audio Cord	Note: TV set with progressive-scan
	video input

If your progressive scan TV has Y, Pb Pr video inputs you can use the players Y, Cb/Pb, Cr/Pr outputs . Press the p-Scan button to switch the player to the progressive scan video output mode.

If this player’s audio outputs are also connected to the TV, the L/R channels of 2-CH OUT should be connected to the TV’s AUDIO IN terminals.

It is imperative that you use high quality component video cables to ensure the best possible performance.

70 Series DVD Player 20