Califone DVD105 operation manual Trouble Shooting

Page 23

TROUBLE SHOOTING

Check the following guide for the possible cause of a problem before contacting service.

Symptom

Cause

Correction

No Power

• The power cord is disconnected.

• Plug the power cord into the wall outlet and unit

 

securely.

 

 

The power is on, but DVD

• No disc is inserted.

• Insert a disc. (Check that the DVD or audio CD

player does not work

 

indicator in the DVD display is lit.)

No Picture

• The TV is not set to receive DVD signal

• Select the appropriate video input mode on the

 

output.

TV so the picture from the DVD player appears

 

 

on the TV screen.

 

• The video cable is not connected

• Connect the video cable into the jacks

 

securely.

securely.

 

 

 

 

• The connected TV power is turned off

• Turn on the TV.

No Sound

• The equipment connected with the au-

• Select the correct input mode of the audio re-

 

dio cable is not set to receive DVD sig-

ceiver so you can listen to the sound from the

 

nal output.

DVD player.

 

• The audio cables are not connected

• Connect the audio cable into the jacks

 

securely.

securely.

 

 

 

 

• The power of the equipment connected

• Turn on the equipment connected with the au-

 

with the audio cable is turned off.

dio cable.

 

 

 

 

• The Digital Audio Output is set to the

• Set the Digital audio Output to the correct

 

wrong position.

position, then turn on the DVD player again by

 

 

pressing the POWER button.

The playback picture is poor

• The disc is dirty.

• Clean the disc.

The DVD player does not

• No disc is inserted.

• Insert a disc

start playback

• An unplayable disc is inserted.

• Insert a playable disc. (Check the disc type,

 

 

color system and Regional code.)

 

 

 

 

• The disc is placed upside down.

• Place the disc with the playback side down.

 

 

 

 

• The disc is not placed with the guide.

• Place the disc on the disc tray correctly inside

 

 

the guide.

 

 

 

 

• The disc is dirty.

• Clean the disc.

 

 

 

 

• A menu is on the TV screen.

• Press the SET UP button to turn off the menu

 

 

screen.

 

 

 

 

• The Rating level is set.

• Cancel the Rating function or change the rating

 

 

level.

The Remote Control does

• The remote control is not pointed at the

• Point the remote control at the remote sensor

not work properly

remote sensor of the DVD player.

of the DVD player.

 

• The remote control is too far from the

• Operate the remote control within about 23ft

 

DVD player.

(7m).

 

 

 

 

• There is an obstacle in the path of the

• Remove the obstacle.

 

remote control and the DVD player.

 

 

 

 

 

• The batteries in the remote control are

• Replace the batteries with new ones.

 

exhausted.

 

 

 

 

23

Image 23
Contents DVD / Video CD / MP3 / CD Player Safety Precautions Safety CertificationLaser Safety Playback features Main FeaturesFeatures of playback specifications Features of audio specificationsDisc manintenace Disc typesMP3 Region Management InformationSafety precautions Fuse Replacement AccessoriesBattery installation remote control unit PrecautionsRemote Control Unit System Connection LCD Display Program Function Button Remote ControlReturn Time TitleChapter Playing Discs DVD Player OperationStopping Playback Playing AT Various Speeds / Frame by Frame Using the Menus Playing VCD with PBC Function PBC Playback Using the GUI ScreensDVD GUI PBC Play ModeSvcd / VCD GUI TrackSetting the Language for Display and Sound Language Setup Settings and AdjustmentsUsing the Setup Display Setting for Audio Setting for VideoOther Menu Setting for Rating Parental ControlMP3 Menu PAL / Ntsc SpecificationTrouble Shooting