Audiovox FPE1906DV operating instructions Troubleshooting, Other Notes

Troubleshooting

SYMPTOM	CHECK ITEM
	Make sure disc is loaded in.
	Make sure disc is loaded upside down.
	Make sure disc is not dirty or warped.
The player cannot play.	Make sure the player’s region code is the same as region code
	of DVD disc.
	Make sure water condensation has not occurred. If it occurs,
	take out disc and leave the player on for at least one hour.
	Make sure system connection is correct.
	Make sure the sound setup of DVD disc is correct.
There is no sound.	Make sure disc is not dirty or warped.
	Clean or replace the disc.
	Make sure the speakers are not muted.
	In the TV mode, set the correct sound mode.
	Make sure the unit is turned on and the connections are
LCD does not display	correct.
	Make sure the power adapter is correctly connected.
Cannot continue to play or a	Make sure is not in A-B or other repeat status.
section is played repeatedly.	Make sure disc is not dirty or damaged.
	Check if the connections with the external AV signal source are
	correct.
There is no picture or picture	Correctly set the items in the picture menu.
moves up and down.	Check if the video type input signal is not corresponding to the
	unit.
	Make sure the unit is turned on and in correct video type.
	Make sure there are no obstructions between the remote
The remote control does not	control and the player.
	Make sure the remote control is pointing at the player.
work.	Make sure batteries are inserted and the polarity is correct.
	Make sure battery is not weak.

Other Notes:

Static or other external interference may cause the player to behave abnormally. In this occurs, unplug the power-supply cord from the outlet and plug it in again to reset the player. If the problems persist, then please disconnect the power and consult a qualified technician.

- 42 -