Customizing the Function Settings
Video Output
1.Press the SETUP button.
2.Use 
or 
button to select Video, then press the ENTER button.
3.Use 
or 
button to select Video Output, then press the ENTER button.
4.Use 
or 
button to shift and select the signal, then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Note:
The RGB option is ONLY useful for use in Europe, and should not be selected.
Attention :
Always set Video Output in CVBS, otherwise, the picture on the TV may be distorted. If this occurs, and you cannot see the screen, follow these instructions:
1.Change FUNCTION to DVD mode.
2.Open the DVD door.
3.Press the SETUP, 
, ENTER, 
, ENTER, 
, ENTER & RETURN buttons.
Brightness
1.Press the SETUP button.
2.Use 
or 
button to select Video, then press the ENTER button.
3.Use 
or 
button to select Brightness, and then press the ENTER button.
4.Use 
or 
button to shift and select the Off/On, then press the ENTER button.
5.If you want to exit the SETUP MENU and return to the normal screen, press the RETURN button.
On : Picture will be brighter to clarify details.
Off : Picture will have deepened colors.
Note:
• Actual effect on pictures will vary depending on the TV.
E - 32 | (continued on next page) |