Audiovox DT102, DT7, DT85 Screen And System Panel Controls, Storing a Radio station in memory

Screen And System Panel Controls

RADIO MODE:

AM / FM – Press the source button until “Radio” appears on the display.

Press the “Radio Band” button to select the following: ( AM, FM1 and FM2)

Tune Radio Channel – Press the “Radio Tune” button either Up (+) or Down (-) to manually tune through the frequencies. “-” Button to decrease the radio frequency and the “+” button to increase the radio frequency.

Storing a Radio station in memory

1.) Press the “Recall” button. (The station number will be displayed on the LCD display) Press the “Recall” button again and “preset 1” will be displayed.

2.) Press the “Radio Tune” button to select the desired radio station

3.) Press the “Store” button to enter the station into memory. “Memo” will be displayed on the LCD display to indicate the channel has been stored in memory.

–To store the next radio station in memory follow steps 1-3 above. Press the “Recall” Button until the desired preset number is displayed.

A maximum of 5 presets are available for each radio band (AM,FM1 and FM2).

Seek Tuning – Press and hold the Radio Tuner Up (+) or Down (-) button for 2 seconds to start seek tuning . The DTT7810FM will search for and stop on the next active station.

Accessing Preset Stations – Pressing the “Recall” button repeatedly to access the available presets.

Manual Tuning – Press the Radio Tune Up (+) or Down (-) button repeatedly to manually tune to the desired station.

NOTE: Consult the owners manual supplied with your shuttle (DT102, DT85, DT7) product for complete DVD operating instructions.

12