Wired Headphones, Wireless FM Modulator

Wired Headphones

There are two 1/8” headphone jacks on the VOD8521 that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the VOD8521 or the remote control.

Wireless FM Modulator

The VOD8521 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the VOD8521 audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using either the FM transmitter buttons on the remote (On/Off, Channel Select) or the FM Select button on the unit.

AV1 Input

The AV1 video input may be connected to a Video cassette Player (VCP), video game system, or other audio / video devices. To access the A/V1 input, turn the VOD8521 on and press the source button on the VOD8521 or the Source button on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The VOD8521 is now ready to play the audio and video signals from the source connected to AV1 input. The AV1 input requires a 8010730 cable.

*NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your overhead pod.

If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio quality. Please contact the installer if this is the case with your product.

-17-

128-7256A

17 of 35