Wired Headphones
There are two 1/8” headphone jacks on the VOD1221 that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the VOD1221 or on the remote control.
Wireless FM Modulator
The VOD1221 is equipped with
AV1 / AV2 Inputs
The AV1 or AV2 inputs may be connected to a Video cassette Player (VCP), video game system, or other audio / video devices. To access the A/V1 or AV2 inputs, turn the VOD1221 on and press the source button on the VOD1221 or the Source button on the remote control until “AV1 or AV2” is displayed on the screen. Turn the video source component on with its power button or remote control. The VOD1221 is now ready to play the audio and video signals from the source connected to the AV1 or AV2 input . The AV1 and AV2 inputs require a 8010730 cable. When the TV tuner is installed the AV2 input becomes inactive.
*NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your overhead pod.
If wireless reception is unsatisfactory, an optional wired relay box (AUDIOVOX P/N SIRSWB) can be installed which will improve audio quality. Please contact the installer if this is the case with your product.
128-7431A
17 of 38