Astar electronic DVD-3800 manual Basic Operation, Basic Playback

Basic Operation Basic Playback

Preparation before playing:

1.Connect the DVD player to your TV and amplifier.

2.Turn on the TV.

3.Set the TV to the AV input connected to the DVD player.

4.Turn down the volume on your amplifier, and then power it on.

5.Set the amplifier to the AV input connected to the DVD player.

DVD-3800

DVD/CD/CD-R/CD-RW/DVD-R/DVD-RW/MP3/HDCD/JPEG PLAYER

ON

POWER OFF OPEN/CLOSE PLAY/PAUSE STOP REV FWD PREV NEXT

Remote Control Operation Advanced Features

During DVD or CD playback, press and hold to scan forward. The player will review the disc at 2, 4, 8 and 20 times normal speed as follows:

X2 X4 X8 X20

Press PLAY to resume normal playback.

During DVD or CD playback, press and hold to scan in reverse.

The player will review the disc at 2, 4, 8 and 20 times normal speed as follows:

X20

Press PLAY to resume normal playback.

STEP 1 - Press POWER to start the player. The DVD logo appears on the TV screen.

STEP 2 - Press OPEN/CLOSE either on the front panel or remote control. When the tray is opened, place the disc on the tray with the label side up. Press OPEN/ CLOSE again to close the disc tray.

STEP 3 - Press the PLAY button on the front panel or remote con- trol. The player will automatical- ly read and identify the disc, and begin playback.

PREV

Press PREV to skip to previous chapter or track.

NEXT

Press NEXT to skip to the next chapter or track.

STOP

Press STOP during playback to stop and hold playback.

Press RUSEME to resume playback from the point you pressed STOP.

Note: The screen saver will automatically turn on if playback is

stopped about 5 minutes(when Screen Saver is set to on).

-12- -21-