Connecting to a Hdtv

Getting Started

FL FR SUB

S-VIDEO IN

SL SR CENTER L

VIDEO

R COAXIAL S-VIDEO OPTICAL

To connect video to a HDTV you can use either the same connections as for TV with Component Video. You will need to press the MODE button on the remote control to toggle between non-interlaced (HDTV) and interlaced (STANDARD) video output.

You can only use the MODE button when there is no disc inserted in the disc tray.

SUB

VIDEO

CENTER

COAXIAL S-VIDEO

OPTICAL

-OR-

Dolby Digital AC-3 Receiver/Decoder

Connecting to a Dolby Digital AC-3 Receiver/Decoder

Using either an RCA-ended COAXIAL cable suited for digital audio use or an OPTICAL cable,connect one end to the appropriate jack on the DVX-580G (Coaxial or Optical) and the other end to the appropriate jack on the AC-3 decoder/receiver (Coaxial or Optical).

IfyouhavebothcoaxialandopticalinputsonyourAC-3decoder/receiver,itisrecommendedtouseanopticalconnectionasthosecableseliminatethepossibilityof EMI (electromagnetic interference).

If your Dolby Digital Receiver does not have a built-in AC-3 decoder, and has 5.1 channel RCA inputs, you can use the 5.1 channel output jacks on the DVX-580G. Either method will provide for AC-3 decoding.

DOLBY 5.1 AMPLIFIER

FL	FR	SUB	Y	Cb	Cr	VIDEO
SL	SR	CENTER	L	R	COAXIAL	S-VIDEO	OPTICAL

Connecting to a Dolby Pro Logic Ampliﬁer

Using six RCA patch cables, connect the plugs from one side of the cables to the FL, FR, CENTER, SL, SR and SW outputs on the DVX-580G. Connect all the plugs from the other side to the FL, FR, CENTER, SL, SR and SW inputs your Dolby Pro Logic ampliﬁer.