Advanced Playback, Video Mode, Repeat, Subtitle

ADVANCED PLAYBACK

IMPORTANT

All descriptions refer to DVDs. Function and display may vary if other types of discs are used.

VIDEO MODE

The video output can be set to “YCbCr”, “YPbPr”, “S-VIDEO”, or “RGB”.

OSD (On Screen Display)

Press DISP to switch between “title played”, “title left”, “chapter played”, “chapter left”, and “display off”.

REPEAT

Press REPEAT once to choose on-screen which chapter to repeat. Press once more to choose the title to be repeated, and press a third time to choose to repeat all, and four times to cancel the repetition.

A-B REPEAT

Press A-B RPT to set up the starting point and again to set the stop point and complete the set-up. The section between A and B will be repeated. Press the button a third time to cancel.

SUBTITLE

When SUBTITLE is pressed, the display shows “SUBTITLE 01/XX XXXXX”. "01" designates the language number, "XX" the total number of languages, and “XXXXX” designates the country's language (the number of languages depends on the disc). A selection of up to 32 languages is available on the screen.

SLOW

Press SLOW to play a disc slowly forwards or backwards. The speed changes every time you press SLOW. Press ENTER/PLAY to return to normal playback.

Note: This function cannot be used for CD and MP3.

STEP

Press STEP to step a single frame/picture forward during playback. Pres STEP several times to step several frames/pictures forward. Press PLAY to resume playback

PROGRAMME

Press PROG to enter programme mode. Enter the number at the desired programme on track or title and chapter and move the cursor to START to start the programme. If you wish to cancel the function, press STOP and then ENTER/PLAY.

TIME (search)

Press TIME once, to view the search menu, and press once more to cancel the function. In the search menu, use the UP/DOWN- and DIGIT- buttons to make the desired choice. Press the ENTER/PLAY button to confirm the choice.