Onkyo DV-CP704S Abnormal Behavior, Restoring the Default Settings, Hdmi Status Mode

Page 51

Troubleshooting—Continued

■Abnormal Behavior

The DV-CP704 contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again. Alternatively, press and hold the Stop [] button until “RESET” appears on the display (about 10 seconds).

■Restoring the Default Settings

To reset the DV-CP704 to its factory defaults, turn it on, and when “ONKYO DVD” has disappeared from the display, while holding down the Stop [] button, press the [STANDBY/ON] button. “INITIALIZE” appears on the display. When the reset is complete, “COMPLETE” is displayed, and the DV-CP704 enters Standby mode.

■HDMI Status Mode

If you’re using an HDMI connection and there’s no picture or sound, you can check the status of the HDMI connection by pressing and holding down the DV-CP704’s [DISPLAY] button for 10 seconds until a message ID appears on the display. Look up the message ID in the following tables and check the HDMI connections and settings on both the DV-CP704 and the connected component.

HDMI connection and HDMI-related settings status

 

Displayed ID

Message

 

 

 

 

MSG ID 001

Turn the DV-CP704 and the connected component off, then turn them on again. Make sure that the

 

connected component is working properly and that the DV-CP704’s HDMI settings are configured

 

MSG ID 015

 

suitably for that component.

 

 

 

 

 

No picture from the HDMI connection

 

 

 

 

Displayed ID

Message

 

 

 

 

MSG ID 002

The HDMI Output Setting is set to Off. Change it to On (page 44).

 

 

 

 

MSG ID 003

The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI

 

MSG ID 004

input on the TV or AV receiver is correctly configured to received HDMI.

 

 

 

 

 

Make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.

 

MSG ID 005

The connected component may not support HDCP. Make sure the connected component supports

 

HDCP.

 

MSG ID 006

 

Turn the DV-CP704 and the connected component off, then turn them on again.

 

MSG ID 007

 

The DV-CP704 may be connected to the other component’s DVI jack. Some TVs may not properly

 

 

 

 

receive the video output by the DV-CP704. Also, with a DVI connection, there will be no sound.

 

 

 

 

MSG ID 008

The DV-CP704’s HD Resolution setting is set to 720p or 1080i. If your TV doesn’t support these

 

resolutions, select another resolution (page 39).

 

 

 

 

 

 

MSG ID 009

The connected component may not be receiving the HDMI signal properly.

 

Try selecting another resolution on the DV-CP704 (page 39).

 

 

 

 

 

No sound from the HDMI connection

 

 

 

 

Displayed ID

Message

 

 

 

 

MSG ID 010

The DV-CP704’s Digital/HDMI Audio Out setting is set to Off. Change the setting to All or PCM

 

(page 45).

 

 

 

 

 

 

MSG ID 011

The connected component may not support 96 kHz PCM. Set the DV-CP704’s Linear PCM Out

 

MSG ID 014

setting to Down Sample On (page 45).

 

 

 

 

MSG ID 012

The connected component may not support Dolby Digital. Set the DV-CP704’s Digital/HDMI Audio

 

MSG ID 013

Out setting to PCM (page 45).

 

 

 

 

MSG ID 016

The connected component may not support DTS.

 

The DV-CP704 cannot play the DTS format audio or soundtrack. On your DVD-Video disc’s audio

 

MSG ID 017

 

setup menu, select an audio format other than DTS.

 

 

 

 

 

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Basic Playback ConnectionsAvis Important Safety InstructionsPrecautions PowerInstalling this Unit FCC Information for User PrecautionsFor models having a power cord with a polarized plug Label on the right is applied on the rear panelContents Supplied Accessories DV-CP704 FeaturesIntroduction Disc Notes IntroductionDisc Content Organization MP3/WMA/JPEG CompatibilityAbout WMA Copyright Cleaning DiscsHandling Discs Storing DiscsCompressed digital video format used for Video CDs DV-CP704-related TerminologyJpeg Joint Photographic Experts Group Compressed file format used to store digital pho- tosFront Panel Controls & ConnectorsDisplay Controls & ConnectorsRear Panel Power cordRemote Controller ASPECT/ZOOM button 41 Resolution buttonSetup button Chain Mode buttonBefore Using the DV-CP704 Installing the Remote Controller’s BatteriesUsing the Remote Controller Optical Digital Jack Connecting the DV-CP704AV Cables & Connectors Before Making Any ConnectionsVideo cable Connecting the DV-CP704Connecting Your TV or Projector Compatibility of this unit with progressive-scan TVsDigital Connection Connecting an AV receiverConnecting a Stereo Amp Analog ConnectionAV receiver Connecting a Component with an Hdmi InputWhat is HDMI? Using HdmiAudio Formats Connecting -compatible ComponentsHdmi & the DV-CP704 VideoPowering Up & Setting Up the DV-CP704 Powering Up the DV-CP704First Time Setup Loading & Removing Discs Basic PlaybackBasic Playback Loading Discs During PlaybackSelecting Discs Stop To stop playback, press the Stop Button Starting, Pausing & Stopping PlaybackStart To start playback, press the Play Button Pause To pause playback, press Pause buttonSee page 23 Navigating Disc MenusLoad and select a DVD-Video DiscFor audio CDs Using the Disc Navigation WindowLoad and select an audio CD or MP3, WMA, or Jpeg discLoad and select a disc SelectingTitles, Chapters &Tracks by NumberPress the Stop Button to stop PlaybackLocating Specific Points in Time Pause playback, and then press Frame-by-Frame PlaybackFast Forward & Reverse Press the Pause button toSlow-motion Playback Adjusting the Display BrightnessUsing Jpeg CDs Chain Mode indicator flashes on the display Using Chain ModeUsing Party Mode Press the Party Mode buttonRepeat Playback Advanced PlaybackRandom Playback Advanced PlaybackInserting New Items in the List Memory PlaybackSelecting Camera Angles Deleting Items from the ListEditing Steps Selecting Subtitles Selecting Languages & Audio FormatsSetting the Hdmi Press the Resolution buttonTo turn Hdmi on or off Disc and press the Play but Using Last MemoryButton once or twice To resume playback, selectZooming Displaying InformationConfiguring the DV-CP704 TV Shape Using the Onscreen Setup MenusConfiguring the DV-CP704 Picture MenuHD Resolution View ModeHdmi Output Setting Progressive SettingAudio Menu Display Menu Language MenuOperating Setting Menu Parental LockChange the Security Code Selecting Other Languages Initial Setup MenuLanguage Code List TV Shape-see Hdmi Output Setting-see On-Screen Language-seeTroubleshooting Troubleshooting Restoring the Default Settings Hdmi Status ModeAbnormal Behavior Specifications

DV-CP704S specifications

The Onkyo DV-CP704S is a versatile and highly regarded DVD player that combines advanced technology with user-friendly features, making it a popular choice for home entertainment enthusiasts. As a progressive scan DVD player, it excels in providing superb video and audio quality, ensuring an immersive viewing experience that appeals to both casual viewers and cinephiles alike.

One of the standout characteristics of the Onkyo DV-CP704S is its impressive storage capacity. This player is capable of handling up to six discs at a time, thanks to its multi-disc capabilities. This feature not only simplifies the playback process for users who enjoy marathons of their favorite films or series but also adds convenience by reducing the need to frequently swap discs.

In terms of video performance, the DV-CP704S employs advanced progressive scan technology, which significantly enhances the clarity and sharpness of images compared to standard interlaced output. This results in seamless, high-resolution video reproduction that boasts vibrant colors and lifelike detail, making it suitable for both standard DVDs and higher-quality sources.

Audio performance is equally significant, with the Onkyo DV-CP704S supporting a variety of audio formats, including Dolby Digital and DTS. This compatibility allows for an immersive surround sound experience, ensuring that viewers are fully absorbed in their content. Additionally, the player features a high-quality built-in DAC (Digital-to-Analog Converter), which ensures that even the most subtle audio details are rendered clearly and accurately.

Connectivity options also play a crucial role in the appeal of the DV-CP704S. The player is equipped with multiple outputs, including component, composite, and S-Video outputs, as well as an optical digital audio output. This versatility allows users to easily integrate the player into their existing home theater systems, providing flexibility in setup and configuration.

Another noteworthy feature is the on-screen display and easy navigation controls, which enhance user experience by allowing quick and effortless access to features and settings. The remote control is designed for ease of use, ensuring that users can easily manage playback, browse menus, and adjust settings without hassle.

In summary, the Onkyo DV-CP704S is a well-rounded DVD player that offers a combination of cutting-edge technology, user-friendly features, and impressive audio and video performance. With its multi-disc capabilities, superior progressive scan output, and comprehensive connectivity options, it remains a solid choice for anyone looking to enhance their home viewing experience.
Top Page Image Contents