Onkyo DV-S555 instruction manual Adjusting Audio and Video Settings, Using the Setup Screen Menus

Adjusting Audio and Video Settings

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

Using the Setup Screen Menus

1	ON	Press ON (STANDBY/ON on the
		front panel).

2	SETUP	Press SETUP.
		The Setup screen appears.

Example
Audio	Video1 V2 Language	General
	Audio DRC — Off
	Dolby Digital Out — Dolby Digital
	DTS Out — Off
	96kHz PCM Out — 96kHz 348kHz
	MPEG Out — MPEG 3PCM
Setup audio
Digital output format/tone adjust
	Move	SETUP	Exit

3	Use the cursor buttons (2/3) to
	select the menu you want.
	As each menu is selected with the cursor,
	the settings appear below the menu
	heading.
4	Use the cursor buttons (∞) to enter
	the menu.

6	Use the cursor buttons (3) to enter
	the setting options.
	Example
		Audio	Video1	V2	Language		General
			Audio DRC — Off
			Dolby Digital Out			Dolby Digital
				DTS Out		Dolby Digital 3 PCM
			96kHz PCM Out — 96kHz 348kHz
			MPEG Out — MPEG 3PCM
		Output Dolby Digital
			Move			ENTER Select SETUP Exit

•Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press 7 first before pressing SETUP.

•Operating the menu after pressing 7 may cancel the resume function.

•Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

The top item within the menu becomes
highlighted.
Example
Audio	Video1	V2	Language		General
	Audio DRC — Off
	Dolby Digital Out			Dolby Digital
		DTS Out		Dolby Digital 3 PCM
	96kHz PCM Out — 96kHz 348kHz
	MPEG Out — MPEG 3PCM
Change Dolby Digital output mode

7

ENTER

Use the cursor buttons (5/∞) to select a new setting and press ENTER to set the new setting in memory.

Press RETURN or the cursor button (2) to exit the options without making any changes.

	Move	ENTER Select SETUP Exit
5	Use the cursor buttons (5/∞) to
	select the setting you want to

change.

The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.

38

8	RETURN	Press RETURN or the cursor button
		(2) to go back to the main menu bar

to select another menu.

9	SETUP
	Press SETUP to close the Setup
	screen.

The Setup screen closes.

Notes

•If you turn off the DVD player during setup, the settings are canceled. Press SETUP to finish the setup.

•The memorized resume position may be erased by setup.

•The Setup screen always shows the latest settings.