AUXILIARY EQUIPMENT
Listening to a cassette/MD/MP3 portable
player or other equipment
You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information.
Be sure to remove inserted CDs to prevent possible damage to the unit before connecting the equipment.
AUX IN jack
1Connect a cassette/MD/MP3 portable player or other equipment via the unit’s AUX IN jack (3.5 mm).
2Press FNC repeatedly until “AUX” appears in the display.
During AUX mode, the clock display appears.
TROUBLESHOOTING
Error code
In the following cases the corresponding error code indication appears. Follow the suggestions below to solve such problems. If the error code indication does not disappear, consult an AIWA service center.
E03 Focus error. Check that the CD is loaded properly (right side up, etc.), and the CD contains valid data.
Reset button
If a CD does not operate properly, press the reset button with a pointed object such as a pencil, etc. Note that all your settings will be erased if this button is pressed.
Reset button
OTHER FUNCTIONS
Smart Jog
Changing the key illumination color
You can choose blue or red as the key illumination color.
1Press and hold FNC until “ILL” appears in the display.
2Turn the Smart Jog to select 1 (for blue) or 2 (for red).
MAINTENANCE
Cleaning the front panel
Wipe the surface with a soft, dry cloth.
Cleaning the connector
The connector needs to be cleaned occasionally. Wipe the surface of the connector with a cotton swab slightly moistened with alcohol.
Back of the front panel
ENGLISH 6