Symptom | Cause | Correction | |
| Signal not properly connected. | Connect signal securely. | |
No sound | Disc warped or dirty. | Clean your disc. | |
| Player in mute status. | Press MUTE button again. | |
|
|
| |
No picture | Signal not properly connected. | Connect signal securely. | |
TV not set for proper system. | Reset the AV/TV status of your TV set. | ||
| |||
|
|
| |
No color | TV system not right. | Press P/N button on the remote control to set the system. | |
TV set color not properly adjusted. | Readjust color of your TV set. | ||
| |||
|
|
| |
| No disc in the player. | Load a disc. | |
No disc reading | Disc not properly loaded. | Reload a disc, with the label side facing up. | |
| Condensation on the laser head. | Turn on the player, unload the disc and leave it on for about one hour. | |
|
|
| |
Remote control | Remote control not pointing to the sensor | Use the remote control properly. | |
window. | |||
| |||
failure | Remote control's operating distance more | Replace both batteries. | |
than 8 meters away from your TV set. | |||
| |||
| Batteries low. |
| |
|
|
| |
Temporary | Wait 5~10 seconds and the player will automatically return to normal. | ||
Wrong buttons pressed. | Operate once more. | ||
function failure | |||
Static leakage into the player from outside. | Turn off the player for 1 to 2 minutes, then turn it on again. | ||
|
Picture rolling
TV set system not properly adjusted.
Readjust system of your TV set.
26