![](/images/new-backgrounds/1127881/12788131x1.webp)
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
Installation and Setup
BEFORE OPERATION
LOCK (PARENTAL CONTROL)
LOCK
RatingUnlock
PasswordNew
Country Code | UK |
Move
Select
RATING DVD-V
Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.
The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable.
1Select “Rating” on the LOCK menu then press
.
2To access the Rating, Password and Country Code features, you must input the
Input a
3Select a rating from 1 to 8 using the buttons.
Rating
Rating one (1) has the most restrictions and rating eight (8) is the least restrictive
Unlock
If you select unlock, parental control is not active and the disc plays in full.
NOTE
If you set a rating for the player, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have a lower rating. If no suitable alternative is found, playback stops. You must enter the
4Press ENTER to confirm your rating selection, then press SETUP to exit the menu.
PASSWORD (SECURITY CODE)
You can enter or change password.
1Select Password on the LOCK menu then press .
2Follow step 2 as shown left (Rating). “Change” or “New” is highlighted.
3Enter the new
4Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using the following steps:
1Press SETUP to display the Setup menu.
2Input the
3Enter a new code as described above.
COUNTRY CODE ![](/images/new-backgrounds/1127881/12788131xi9.webp)
Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter.
1Select “Country Code” on the LOCK menu then press .
2Follow step 2 as shown in the left column (Rating).
3Select the first character using buttons.
4Press ENTER and select the second character using buttons.
5Press ENTER to confirm your country code selection.
16