Adjusting the Player’s Settings

Adjusting the Player’s Settings

Your player is preset to work with most setups out of the box, but if you would like to adjust any of the player’s settings, you can use the on-screen menu to do so. The Settings menu is divided into these parts:

•General Setting

•Display Setting

•Audio Setting

•System Information

Adjusting the Display Settings

From the Display menu, you can adjust the way the player displays your video.

To access the Display menu:

1.Turn on the player and your TV. Use the Arrow buttons on the remote to highlight Settings and press OK.

2.Use the Arrow buttons on the remote to highlight Display Setting and press OK.

Your current settings are displayed to the right of each menu option.

Changing the Display Resolution

For the best viewing experience, you should adjust the player’s settings so that it outputs video in a resolution supported by your TV.

To change the display resolution:

1.From the Display menu, use the Up/Down Arrow buttons on the remote to highlight Output to TV and press OK. Then highlight Resolution and press OK.

2.Using the Arrow buttons, highlight the highest resolution your TV can display, then press OK.

If your TV is connected to the player using HDMI, select HDMI Auto. The player will detect the best display resolution automatically.

If you choose a resolution unsupported by your TV, you will see an error message.The resolution will revert to its previous setting.

Only HDMI connections can display 1080p video.