Laser DVD-HD007 manual No Video displayed on TVV

Page 9

DVD-PLAYER

No Video displayed on TVV

Make sure TV is turnedd on.

Check the cable connections.

Check the input selectiion on the TV is correct.

Player does not respond to remote

Clear any obstacle between the remote and the player.

Try moving closer or reeduce the angle to the player.

Check the condition off the batteries and replace if necessary.

Clean the sensor panel on the player.

No audio during DVD/file playback

Check the audio outpuut of the player is set correctly.

If using external ampliffier/speakers, ensure connections are correcct and amp is turned on.

Check input on TV/Monitor.

Check files audio track is supported by this player.

Disc playback is jerky

Check the condition off the disc. If surface is damaged or scratched repair or replace if necessary.

Video file playback is jerky and stops

Check the file is compaatible with player.

Check resolution of filee. High Definition files may cause intermittennt playback issues. Reduce resolution and bit rate of file to improve playback.

Abnormal Player operatioons

Turn the player off and unplug the player from wall. Wait for 1 or 2 minutes and plug back in. Player shhould now function normally.

Disc is locked in player

If the player will not eject disc. Turn the power OFF and then ON again. Immediately press the EJECT button (17) to open the tray.

8

Image 9
Contents Page DVD-PLAYER Service Front of the DVD player PN / Audio Prog Search Subtitle Angle Setup Left Enter DVD-PLAYER Sets the default audio output for the DVD player Title Function No Video displayed on TVV For More innformation and technical support please visit