System Setup
Set Last Memory Function
The DVD player can identify the last format of the disc being used to store the last frame shown in its memory prior to unit being powered off. This function memo- rizes the point at which the disc was stopped. The disc can be removed from the unit. Then if the same disc is loaded again, play will resume from the point at which it was stopped, providing that no other disc of the same format was loaded in the interim.
The DVD player memorizes the two differ- ent disc formats (DVD and CD). Each type of disc can be stopped, removed from the tray and play can be resumed without affecting the memory function of the other two disc formats. If the DVD player is con- nected to the vehicle's lighter socket, the last memory function will only operate when the DVD is powered off by the power button on the remote control or from the power button on the unit's front panel.
To activate the Last Memory Function, press the SETUP button to access the General Setup Page. Press the
SELEC- TION button to access the Last Memory submenu. Press the 
SELECTION button to highlight "On". Confirm your selection by pressing the ENTER button. To exit this menu, press the SETUP button.
General Setup ageP
TV DISPLAY | PS | ||
ANGLE MARK | ON | ||
OSD LANGUAGE | ENG | ||
CAPTIONS | OFF | ||
SCREEN SAVER | ON | ||
|
|
|
|
LAST MEMORY | ON |
| On |
|
|
| Off |
Set LastMemory Function
16