Operations
*Screen Saver
If set to ON, when you leave the system in stop or pause mode for more than one minute, the screen saver will be activated. The default setting is “ OFF” .
*Test Tone (disc mode only)
If set to ON, the system will test the speaker set- tings. The test signal is generated through the left , right speakers. The default setting is “ OFF ” .
Setting the sound | Setting the Language |
|
DIGITAL OUTPUT | ALL |
NIGHT MODE | OFF |
CENTERDELAY | OFF |
TEST TONE |
|
GO TO SOUND SETUP PAGE
*Digital Output
Digital output selection enalbes you to specify the type of digital output (COAXIAL) suitable for your amplifier or reciever.
ALL (defaulting setting )
-Select this item , if you have connected the digital output to a multichannel decoder receiver.
PCM 96K
-Select this item, if the external component is ca- pable of processing digital signal input with sam- pling rates of 96 kHz.
PCM 48K
-Select this item, if the external component is inca- pable of processing 96kHz digital signal input, then convert to standard signal with sampling rates of 48 kHz.
OFF
-Select this item, to deactivate the digital output (COAXIAL output ).
*Night Mode
Set night mode to on to level out the volume. For example, the disc will play at the same sound level throughout the movie. The default setting is “ OFF” .
AUDIO | ENGLISH |
SUBTITLE | ENGLISH |
DISCMENU | ENGLISH |
GO TO LANGUAGE SETUP PAGE
-Audio
-Subtitle
-Disc Menu
1.This is to select the audio language, subtitle lan- guage and the language used on TV screen menus or DVD menus that will always be used for every disc to be played back. The default setting is “ EN- GLISH ” .
2.If the language selected is not available on the disc, the original language designated by each disc will be selected.
11