Eltax DV-150 instruction manual Safety Information

Page 3

SAFETY INFORMATION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION : To reduce the

risk of fire and electric shock, do not remove the cover (or

back) of the unit. Refer servicing only to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

IMPORTANT SAFEGUARDS

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility, too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operation and using your video product.

8.Do not place naked flame sources, such as candles, on the appliance.

9.Do not locate the appliance or cord near heat sources such as radiators, heaters, air ducts or direct sunlight.

10.Do not block any of the ventilation openings. Ensure that vents are not covered by newspapers, tablecloths, curtains, etc. Do not install in a tight-fitting cabinet.

11.Do not insert or allow foreign objects to enter any grille openings.

12.Do not run the cord under carpeting. Instead, arrange the cord away from traffic areas where it will not become a trip hazard.

13.To disconnect the appliance, turn the appliance off, switch off the power outlet and remove the plug from the power outlet.

14.Do not misuse the cord. Never carry the appliance by the cord or pull to disconnect it from the outlet. Instead, grasp the plug and pull to disconnect.

15.Do not operate the appliance if it has a damaged cord or plug; after the appliance malfunctions; or has been dropped or damaged in any way. Consult Singer for examination.

16.Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous radiation exposure.

Caution

Do not open do not attempt to repair, disassemble or modify this appliance.

Dangerous high voltages exist inside this appliance. This appliance is only to be serviced by Singer Service Technician. There are no user-serviceable parts inside. Do not look at laser pick-up directly. Do not touch

the lens.

Installation

Read all instructions carefully, even if you are familiar with the appliance.

1.This appliance is not intended for use by children or infirm persons without supervision.

2.Children should be prevented from playing with the appliance.

3.This appliance should be placed on a dry, level surface before it is operated.

4.INDOOR USE ONLY this appliance is not intended for outdoor use.

5.Do not expose this appliance to rain or moisture. Do not immerse the appliance in water or any other liquid.

6.Do not place items filled with liquids, such as vases, on the appliance. Do not expose the appliance to dripping or splashing liquids.

7.This appliance is not intended for use in bathrooms, laundry areas or similar moist locations. Never locate this appliance in the immediate surroundings of, or where it may fall into, a bath, basin, washtub, shower or swimming pool.

3

Image 3
Contents DV-150 DVD-Player Page Safety Information Installation Warnings Features Introduction Capacity Care of discDisc information Disc types Recording Digital / Mpeg MethodAbout the player Front panelBack panel Remark Remote controlSystem Connection Play a disc DVD player is equipped with the following video ports Video port setupFor TV System setting Active, does not need settingPower on / OFF Open /Close disctrayPlay / Pause / Step/ Stop Repeat pressing the Button to change slow forward speed Unit muted in Search modeUnit mutes in Slow mode Repeat pressing the button to change search speedDisc TItle /Menu Select an item in menuNumeric Key Pad / Direct Program access PAL / Ntsc switchMulti-Angle During in playback, repeat pressing Language Multi-SubtitleMulti-Audio Soundtrack During in playback, repeat pressing Subtitle buttonReset ModeFirst,You should pressSTOP Key Stop Press Enter Enter button Press the Search button select Search Mode Press DownPress the Search button to T rack Search mode Press the Search button again to Disc Search modeRepeat Mute PBC PlayChannel Load a DVD disc Press the Prog Program settingPress Prog button to cancel the program Load a CD disc Press Prog button to cancel the programMark ReturnClear ShuffleNumber is wrong Disc remain OSD DVD modeOSD CD mode Track 2/3 Disc type Disc Track Playback timeMP3 mode Highlight the desired item Press Enter Press Setup Button to save the setting and quitLanguage sub menu appears Highlight the desired item and press Enter buttonRating Audio digital audioTrouble Shooting Shock, do not remove the cover Or back of the unit. Refer To reduce the risk of fire and electricSpecifications For further information please visit our website