Samsung SSG-3050GB manual Pairing is successfully completed, Be displayed properly, From

Page 2

+ Pairing steps

 

1.

Turn on the lV, and then move the glasses within 19.5 inches of the lV.

 

2.

Press the power button on the 3D glasses briefly. The 3D glasses will power on and

3.

pairing will start.

 

The message "3D glasses are connected to lV." will be displayed on the lV screen when

 

the pairing is successfully completed.

 

 

~

If the pairing failed, the 3D glasses will power off.

 

 

~

If the first attempt to pair fails, power the lV off and on again and perform step

2.

 

~

How to pair again: Press the power button on the 3D glasses for more than 2

 

 

 

seconds.

 

<Pairing is needed again in the following situations:>

 

-

If the 3D glasses do not function, even when the power button is pressed on the 3D lV

 

after repair.

 

+Viewing guidelines

 

 

When viewing a 30 video under a fluorescent lamp (50

Hz - 60 Hz) or

 

 

3-

screen flickering.

 

 

wavelength lamp, you may notice a small amount of

 

* If this occurs, dim or turn off the light.

 

 

Switching the input mode while watching a 3D movie may disable the 3D function

 

on the lV. As a result, the 3D glasses may not function and the movie may not

 

be displayed properly.

 

 

If the 3D glasses are moved outside of their working distance, the signal

from the

 

lV will disconnect and the glasses'3D function will turn off after several seconds.

 

The 3D glasses will power off 30 seconds after the 3D function turns off.

When

 

this

 

 

 

happens, the red LED will turn on for 3 seconds.

 

 

 

* Under some circumstances, the 3D glasses may malfunction due to interference

-

If you want to view a 3D video on a different Samsung 3D

lV released in 2011.

from other devices.

+

Replacing the Batteries

If the red LED blinks every two seconds continually, replace

.

-~-------

the batteries with new ones.

Ensure you are within the working video.

* The images may not be viewable for 3 seconds.

distance of the glasses when you view a 3D

in 3D if you move outside of the working distance

If you lie on your side while watching lV with 3D active glasses, the picture may

 

appear dark or may not be visible.

The 3D glasses may not work properly due to interference from other 3D

 

products or electronic devices that operate on the 2.4GHz frequency such

Fold the r:x:Nf:l: by 00 degroos

0 ,.....---------

.

~

Please insert the battery in the same direction as indicated.

 

 

as a microwave oven or Internet AP.

If the 30 function malfunctions due to

 

interference, please move all other electronic

or wireless communication devices

 

as far away from the glasses and the lV as possible.

The 3D effect may be experienced differently

depending on the viewer. You

 

may not notice the 3D effect at all if

you wear glasses and have an unusual

 

prescription.

 

 

If a part of the 3D glasses or lenses

is defective or damaged, it cannot be

 

repaired and the glasses should be replaced.

If the glasses stop working within

 

the

be repaired or replaced for free. If the

 

warranty period, the glasses can

 

glasses have been damaged due to

the fault

of the customer or the warranty

 

period has expired, a new pair of glasses will

have to be purchased.

I

EngiiSh-2

Image 2
Contents UsersGuide FeaturesPairing 3D Active Glasses Parts ComponentsWhen viewing a 30 video under a fluorescent lamp Pairing is successfully completedSeconds Pairing is needed again in the following situations Distance of the glasses when you view a 3DObjects, tripping, and/or falling May result in a product malfunction or fireSSG-3050GB TroubleshootingSpecifications Model NumberWarranty Conditions WarrantyProcedure for Making a Warranty Claim Together with+ Pairing +IC Statement +NCCTaiwan+FCC Compliance · ~-~I·~~-~~ifm.n~~~~· m~~~~~z.~~