owner’s manual troubleshooting
| signal processors |
If you experience.... | Check that: |
|
|
Signal Processor does not | • Remote |
turn on. | • 12V wire has 12V |
| • Ground wire is properly connected |
Level of sound is low.
•Wiring is not loose or cables misconnected/disconnected
•RCA cables are not faulty.
Background noise is | • Wiring is not loose or cables |
too high. | misconnected/disconnected |
| • RCA cables are not faulty. |
precautions
Enjoy your system, but use it wisely and safely!
•Never drive with the volume raised so high you cannot hear what is occuring in traffic around you.
•Be aware that repeated exposure to excessive volume levels can permanently damage your hearing!
•Keep all electronics away from moisture, dust, extreme heat or extreme vibrations.
•Lanzar Audio products are capable of sound pressure levels in excess of 150 dB. Continuous exposure to sound pressure levels over 100 dB may cause permanent loss of hearing. Use common sense and PRACTICE SAFE SOUND.
20