Copying of Video Files, Connecting to PC

Copying of Video Files

Connecting MR-16SA1 to PC using USB cable allows you to copy or delete the video file from the MR-16SA1.

Connecting to PC

Connect the USB cable between the USB (8) jack on the MR-16SA1 and USB port of PC to copy the video files from your PC.

☛ MR-16SA1 is compatible only with

Windows XP.

Transferring Video Files

1When MR-16SA1 is connected to the PC using USB cable, the unit automatically turns on and appears as an external HDD to your PC.

2Once the USB connection is successfully established, the unit is recognized as a removable disk (ex. E:, F:, G:). You may identify the unit's HDD by its volume label "MR-16SA1".

3When the unit's HDD is identified on your PC, you may copy or delete the video files in the unit's HDD in the same manner as you would operate on your PC.

4Copy movie files into the "Movie" folder, and commercial images into the "AD" folder. Otherwise, you cannot play the files using MR-16SA1.

◆The drive letter of the local disk (e.g. E:, F:, G:, etc.) may differ depending on the computer configuration.

☛The MR-16SA1 only supports MPEG2 transport stream files and commercial image files distributed by Samsung Electronics.

Removing the USB cable from the PC

When you are done copying or deleting the video files, it is recommended to safely remove the unit's HDD.

1Click the Safely Remove Hardware icon in the notification area of the PC. When the Safely Remove Hardware window is displayed, select USB Mass Storage Device and click Stop.

2When the USB Mass Storage Device can be safely removed from the system message is displayed, remove the USB cable.

3The unit turns off automatically when the cable is disconnected.

English - 8