Integra DPS-9.1 Explanation of Each Item in the Audio Category, Audio Out Select

Customizing the Function Settings

Explanation of Each Item in the Audio Category

Audio
Audio Out Select	Bitstream
Dynamic Range Control Off
Karaoke Vocal	Off

Audio Out Select DVD-V DVD-A VCD CD

Select the output sound format corresponding to your system connection.

For details of sound recording systems, see “Output Sound Conversion Table” on page 35.

Bitstream: Select when you connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2* decorder (see page 13).

The DVD Player outputs digital audio information in the bitstream format when you play a DVD- Video recorded in the Dolby Digital, DTS, MPEG1 or MPEG2* recording system.

Analog 6Ch: Select when connected to an AV amplifier equipped with 5.1ch audio inputs.

This DVD Player is equipped with a Dolby Digital and MPEG decoder. The next screen will detail the appropriate settings.

Analog 2Ch: Select when connected to a TV, or Dolby Pro Logic or stereo system via the analog audio jacks (see page 12).

PCM:Select when connected to a 2 channel digital stereo amplifier (see page 13).

The DVD Player outputs sounds in the PCM 2ch format when you play a DVD-Video disc recorded on the Dolby Digital, MPEG1 or MPEG2* recording system.

* Not applicable for USA and Canadian models

When you select “Analog 6Ch”:

Make the following setting for the built-in 5.1ch surround decorder.

Analog 6ch
C. S. Speaker Size	Large
C (Center) Speaker	On
S (Surround) Speaker On
Subwoofer	On
Center Channel Delay	0msec

Surround Channel Delay 0msec

Test Tone

1Select an item by pressing /, and press ENTER.

2Make the setting (see below) by pressing (///), and press

ENTER.

C. S. Speaker Size

Small: When the center speaker or surround speakers cannot reproduce low frequency signals below 120 Hz.

Large: When the center speaker and surround speakers can reproduce low frequency signals below 120 Hz.

C (Center) Speaker

Off: When center speaker is not connected.

On: When you connect center speaker.

S (Surround) Speaker

Off: When surround speakers are not connected.

On: When you connect surround speakers.

Subwoofer

Off: When a subwoofer is not connected.

On: When you connect a subwoofer.

Note

Depending on the DVD-Audio, the audio may be output based only on the channel information recorded on the disc regardless of the speaker settings.

48

DPS-9.1(US_E)p44-55.p65 48 10/11/00, 19:11 DPS-9.1 US_E 29343004