Connecting the Power/
Turning on the DVD Player
Before connecting
•The DPS-5.2 is shipped with the main power (Power) switch in the on position (_On). When the power cord is plugged in for the first time, the DPS-5.2 will automatically enter the standby state and the Standby indicator will light (same condition after step 2 below).
•Make sure that all the connections on pages 13 and 14 are complete (the connection to a TV is required).
POWER
STANDBY/ON
1 | Plug the supplied power cord into | 3 | Standby/On | Press Standby/On on the DVD |
|
the AC INLET and then into the | | Player or ON on the remote |
| power outlet on the wall. | | | controller. |
•Do not use a power cord other than the one supplied with the DPS-5.2. The power cord supplied is designed for use with the DPS-5.2 and should not be used with any other device.
•Never have the power cord disconnected from the DPS-5.2 while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.
AC INLET
| | To the mains |
2 | Power | Press Power to switch on the main |
| power. |
The DVD Player turns on and the Standby indicator turns off.
•To put the DVD Player in the standby mode, press Standby/On on the DVD Player, or STANDBY on the remote controller. Be sure to set the volume to minimum before putting the DVD Player in the standby mode for the next use to avoid sudden loud sound reproduction.
•While the Standby indicator lights up, the DVD Player can receive signals from the remote controller. However, if you press Power on the DVD Player to switch off the main power, the remote controller cannot be used to turn on the DVD Player.
•Setting the STANDBY button to standby does not shut off the power completely.
The DVD Player enters standby mode.
The Standby indicator lights up.
•The buttons on the remote controller do not operate if the Power switch is set to Off.
•To switch off the main power, press Power again.
DPS-5.2
Avis
Important Safeguards
Sur les modeles dont la fiche est polarisee
Precautions
For U.S. model
For Canadian model
Recording Copyright
Power
Regional Restriction Codes Region Number
About This Manual
MP3 compatibility information
Structure of the Disc Content
Playable Discs
About Video CDs
Do not touch the playback side of the disc
Cleaning Discs
Handling Discs
Storing Discs
Table of Contents
Features/Supplied Accessories
Features
Supplied Accessories
Preparing the Remote Controller
Using the Remote Controller
Inserting the Batteries
Front panel
Index to Parts and Controls
Rear panel
Display
Index to Parts and Controls
Remote controller
Connecting to a TV
Connecting to a TV Using the Audio/Video Connection Cable
Making component video connections
Making a digital connection with the amplifier
Making the analog connection with the amplifier
Optical fiber connection cable
Power
Connecting the Power Turning on the DVD Player
Plug the supplied power cord into
Press Power to switch on the main
To exit the Setup Navigator
Setting Up the Player
Using the Setup Navigator
When setting up for the first time
Standard
Setting the OSD Language On-Screen Display Language
Setting the TV screen size
Deutsch Italiano Español
To change other player settings in the Setup screen menus
Setting Up the Player
Setting compatibility with 96 kHz output
Confirming the settings
Getting Started Using Your DVD Player
When an operation is prohibited
Playing DVDs, Video CDs, CDs and MP3s
To navigate a menu screen
Getting Started Using Your DVD Player
When a Menu Screen is Displayed
To Open or Return To the DVD or Video CD Menu Screen
Press £ to resume normal playback
Chapter Track Skip Forward/Skip Back
Forward and Reverse Scanning
Press ¢
Stopping Playback and Switching Power Off
Resuming playback from where you stopped
To return to normal playback
Viewing a still frame
Viewing slow playback
Frame by frame advance playback Viewing one frame at a time
Locating a Specific Title/Folder/Chapter/ Track/Location
Navigate using the following controls
Using the MP3 Navigator
Repeat Play
Repeating a Title, Folder, Chapter or Track
Repeating a Specific Segment
To stop random play
Random Play
Playing in Random Order
To change titles, chapters, or tracks during random play
Programming DVDs
Playing in a Favorite Order
Use the number buttons to enter a three-digit folder number
Programming MP3s
Press Program to enter the MP3
Program screen
Playing in a Favorite Order
Programming Video CDs, CDs
Additional programming options
To add a title/chapter/track to a program
To save a program in memory
To erase a program saved in memory
Press Angle during playback
Selecting the Camera Angle
Viewing from a Desired Camera Angle Multi-Angle
To check whether or not a disc is recorded with angles
AUDIOPress Audio repeatedly to select the desired language
Changing the Audio Language Multi-Language Function
Selecting a Subtitle Language Multi-Language Subtitles
Changing Audio Type
To clear the Last Memory location
Continuing Playback from a
Memorizing Settings for Often
Memorizing Settings for DVDs
Erasing the recorded contents
Viewing Disc Information during while a disc is playing
Viewing Disc Information
Viewing Disc Information during while a disc is stopped
Using Dimmer function
Using the Setup Screen Menus
Adjusting Audio and Video Settings
Changing to the Setup Screen Expert Menu Mode
Settings Expert Basic Factory setting
Return Setup
Dolby Digital Out
Adjusting Audio and Video Settings
Adjusting the Dynamic Range of the Audio Soundtrack
Setting the Digital Audio Output
Digital Out Expert
DTS Out
KHz PCM Out
Mpeg Out
Differences in screen sizes and DVD formats
Setting the TV Screen Size
Settings 43 Letter Box Pan & Scan
Wide Factory setting
Turning the Screen Saver On and Off Expert
Setting the Video 1 Options
Switching the S Video Output Expert
On Factory setting
Selecting a preprogrammed setting
Adjusting the Video Quality
To memorize the setting, select Memory 1, 2, 3, then press
Use the cursor buttons 2/3 to adjust the settings
Repeat steps 4 and 5 to make adjustments to other settings
Use the cursor button ∞ to select Video Setup and press
Changing the Background of the Screen
Setting the Video 2 Options
Setting the Position of the On-screen Display Expert
Turning the angle indicator on and off Expert
Selecting an audio language preference
Setting the Language Options
Setting the On-screen Display OSD Language
Settings English Factory setting
Selecting a DVD menu language preference
Settings On Factory setting
Settings w/ Subtitle Language Factory setting
Selecting a subtitle language preference
Off Assist Subtitle
When Other is selected
Settings With Audio Selected Subtitle Factory setting
Forcing subtitles to be displayed Expert
Language Code List
Level
Setting the Parental Lock Level
Entering the Password
Settings Password
Press Enter to set the new level
Setting the Parental Lock Level
Changing the Password
Setting the Country Code
Country Input-code Country-code
Country Code List
To clear the Function Memory
Memorizing settings Function Memory
Recalling memorized settings
Resetting the Player to System Settings
Controlling a TV
Learning a pre-programming code
Pre-programming remote controller
Pre-programming Code List
Brand Code
Troubleshooting
Symptoms Causes Remedies Pages
DVD Player
DVD Player Remote Controller
Troubleshooting
Specifications
DVD Player
Outputs
Onkyo U.S.A. Corporation