Samsung CSL2099DV, CSL 2097DV manual Changing Channels, Adding and Erasing Channels Manual Method

O P E R AT I O N

Adding and Erasing Channels (Manual Method)

1
Use the number buttons to
directly select the channel
that will be added or
erased.
2	▼ You can view any channel
	(including an erased channel) by
Press the ADD/ERASE button:	using the number buttons on the
Repeatedly pressing this but-	remote control.
ton will alternate between
“Added” and “Erased.”
Changing Channels
Using the Channel Buttons
	▼ When you press the CH or CH
Press the CH or CH	buttons, the TV changes channels in
buttons to change chan-	sequence. You will see all the channels
nels.	that the TV has memorized. (The TV
	must have memorized at least three
	channels.) You will not see channels that
	were either erased or not memorized.

Directly Accessing Channels

Use the number buttons to quickly tune to any channel.

Press the number buttons to go directly to a channel.

For example, to select channel 27, press “2,” then “7.” The TV will change channels when you press the second number.

When you use the number buttons, you can directly select channels that were either erased or not memorized.

To select a channel over 100, press the +100 button. (For channel 122, press “+100,” then “2,” then “2.”)

To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel “4,” press “0,” then “4.”)

Using the Pre-CH Button to select the Previous Channel

	▼	To quickly switch between two chan-
Press the PRE-CHbutton.	nels that are far apart, tune to one chan-
	nel, then use the number button to select
The TV will switch to the last
channel viewed.	the second channel. Then, use the Pre-
	CH button to quickly alternate between
	them.
		CHAPTER THREE: TV OPERATION 3.5