Samsung V70 instruction manual Using the G-CODE Feature DVD-V80/ DVD-V85 Only, Pressing

Page 35

Using the G-CODE Feature ★ (DVD-V80/ DVD-V85 Only)

VCR

Before presetting your DVD-VCR:

◆Switch on both the television and your DVD-VCR

◆Check that the date and time are correct

◆Insert the cassette on which the programme is to be recorded (safety tab intact)

Up to six programmes can be preset.

1Press the TIMER button.

Result: The TIMER METHOD is displayed.

2	Press the corresponding or buttons, until the G-Codeoption
	is selected.

3Press the button to select G-Code.

Result: A message is displayed to allow you to enter the G-Code code.

☛If all six programmes have been set, the message Timer is Full is displayed. Refer to page 38 if you wish to cancel a preset recording.

4Press the numeric buttons to enter the code opposite the pro gramme that you wish to record in your television magazine.

➢If you wish to correct the G-Code code that you are entering:

◆ Press the button until the digit to be corrected is cleared

◆Enter the correct digit

5Press the OK button.

Result: The information concerning the programme is displayed.

☛When using the G-Code function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by

pressing the

or

buttons. Refer to the following page if:

◆The programme number or times flash

◆You wish to modify the programme

6If the programme and times are correct, press the RETURN button.

7Press the STANDBY/ON button to activate the timer.

8Refer to page 38 if you wish to:

◆Check that your VCR has been programmed correctly

◆Cancel a preset recording

☛The numbers next to each TV programme listing are G-CODE code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the G-CODE code for the programme you wish to record.

™G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is manufactured under licence from Gemstar Development Corporation.

OK

1

Timer Method

Standard

G-Code

★(DVD-V70)

Timer Method

If you want to set the timer program,

press the key.

G-Code

Code

Code	: 0 - 9
Correct	:

STANDBY/ON

OPEN/CLOSE

7

GB

35

Image 35

Contents DVD-V Contents Recording Television Broadcasts Symbols Safety Instructions Playback Region Number Disc Type and CharacteristicsDisc Markings DVD Front View of the DVD-VCRDVD -V80 / DVD Rear View of the DVD-VCRInfrared Remote Control Volume + DVD Deck is active DVD, CD, VCD, or Svcd is loaded Display IndicatorsAccessories Connector Location Type Deciding How to Connect DVD-VCRYour DVD-VCR is equipped with the following connectors Make sure that both the television and the DVD-VCR are Connecting DVD-VCR to the TV using the Coaxial CableConnecting DVD-VCR to the TV using the RCA Cable Plug the other end of the coaxial cable into the connectorSound system CamcorderPlug & Auto Set up Tuning Your Television for the DVD-VCR VCR Button Deck Control KeysSTANDBY/ON Button DVD ButtonButtons Basic TV Tuner OperationsTV/VCR Button Prog ButtonAfter pressing the MENU, press the OK or Inserting Batteries in the Remote ControlSetting the Date and Time Set menu Language Setting the Menu LanguageOpen Menu Select LanguageIs selected Presetting the Stations AutomaticallyResult Setup menu is displayed Buttons to select the InstallIf you Then Presetting the Stations ManuallyThen Buttons, until the Manual Clearing a Preset StationChanging the Preset Station Table Press the corresponding , buttons to select the Install Selecting the RF OUT Sound Mode B/G-D/KSetting the DVD-VCR Output Channel Result The Setup menu is displayedPress the corresponding Or buttons, until the Colour Selecting the Colour ModePress the corresponding Buttons to select User Set menu is displayedPress OK or , until Nicam Newzealand Model onlyPlease refer to Intelligent Picture Control Intelligent Picture Control Remote ControlOff 1Hour 2Hour 3Hour Auto Power OffCode Extend DVD-V80/DVD-V85 Only Press OK or Until Timer functions, which cannot be hiddenScreen Messages Selecting the Cassette TypeDVD-VCR allows you to playback high quality S-VHS tapes Repeat PlayVHS Play VCR Selecting the Recording Speed Recording a Programme Immediately Protecting a Recorded CassetteThis function is not available in DVD recording If you wish to cancel the recording before the end, pressPressing Using the G-CODE Feature DVD-V80/ DVD-V85 OnlyPress the Timer button Result The Timer Method is displayed If you wish to Then Modifying G-CODE ProgrammingButtons Using the Timer Programming FeatureButtons or Press To select the recording dayRecorded Checking a Preset RecordingCancelling a Preset Recording You can check your preset recordingsStop the playback Eject the cassette Adjusting Picture Alignment ManuallyThen press You can play a cassette in slow motion Selecting the Audio Output ModePlaying a Cassette in Slow Motion Option DescriptionButtons to minimize this effect No sound is heard when playing back frame by frame PressAfter pressing the SEARCH, press the corresponding or NextSeq Seq. etcII or button Searching for a Specific SequenceButtons, until the Intro Scan option is selected +20Press Info VCR Using the Tape CounterConnecting an RCA Audio/Video Input Cable VCR Recoding from Another VCR or Camcorder Using the Assemble Edit FunctionButton Function Brand CodesDigital Audio out Video Choosing a ConnectionConnection to an Audio System Connection to an Television GBconnectionUsing the Disc Menu Language Setting Up the Language FeaturesPress the , buttons to select ‘English’ Using the Audio LanguageUsing the Subtitle Language Dynamic Compression Setting Up the Audio OptionsDolby Digital Out PCM MPEG-2 Digital OutOK or Button Setting Up the Display OptionsAbout the Rating Level Setting Up the Parental ControlAbout the Change Password Digital Audio Out DVD A/V Receiver ConnectionsSearch Forward/Back StillFrame Advance Step Skip Forward/BackFor 43 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TV For 169 aspect ratio discsPan Scan If you are using a 43 TVDisplays the content of the DVD title in 43 aspect ratio For 169 aspect ratio discs Letter BoxWhen Playing a DVD/VCD/CD DVD Using the Display FunctionDVD disc can contain up to 32 subtitle languages Using the Angle buttonUsing the Subtitle button Buttons to select Off and press OK When playing a DVDPress OK Audio languages are represented by abbreviations Using the Audio buttonSelecting the Audio Language Press the Audio button UseClearing a Mark DVD Using the Mark FunctionUsing the Mark Function DVD/VCD Recalling a Marked SceneBegin playback of the song file MP3/WMA PlayMP3/WMA Play Function Program/Random playbackYour MP3 or WMA files should be ISO 9660 or Joliet format CD-R MP3/WMA discsDisc will be played in random order Program Play & Random PlayProgram Play CD/MP3/WMA Random Play CD/MP3/WMATo see the next 6 pictures, press the l button Picture CD PlaybackCD-R Jpeg Discs Output Technical SpecificationsGeneral InputIs the DVD-VCR tuner properly set? Problems and Solutions VCRCheck if the safety tab is intact on the cassette Check the DVD-VCR aerial connectionsProblem Action Troubleshooting Guide DVDBefore requesting service troubleshooting This Appliance is Distributed by