Samsung SV-DVD540, SV-DVD440 manual Setting Up the Audio Options, Setting Up the Display Options

,❷ buttons, then OK or ❿ button.

Setting Up the Audio Options

1With the unit in Stop mode, press the MENU button.

2 Select DVD using

Setup

Setup

Display Setup

Setup :

3	Select Audio Setup using ,❷ buttons, then press
	the OK or ❿ button.
4	Use the ,❷ buttons to select the desired item.
	Then press the OK or ❿ button.

Dolby Digital Out

MPEG-2 Digital Out

DTS

PCM Down Sampling

Dolby Digital Out

1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.

2.Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output.

➢Be sure to select the correct Digital Output or no audio will be heard.

MPEG-2 Digital Out

1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.

2.Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1CH).Select Bitstream when using the Digital Audio Output.

DTS

1.Off : Doesn’t output digital signal.

2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.

Dynamic Compression

1.On : To select dynamic compression.

2.Off : To select the standard range.

PCM Down Sampling

1.On : Select this when the amplifier connected to the player is not 96KHz compatible.

In this case, the 96KHz signals will be down converted to 48KHZ.

2.Off : Select this when the amplifier connected to the player is 96KHz compatible.

In this case, all signals will be output without any changes.

➢• How to make the SETUP menu disappear or

return to menu screen during set up; Press RETURN or ➛ button.

•Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Setting Up the Display Options

1With the unit in Stop mode, press the MENU button.

2 Select DVD using			,❷ buttons, then OK or ❿
	button.
		Setup
		Setup
		Display Setup
		Setup	:

3	Select Display Setup using ,❷ buttons, then
	press the OK or ❿ button.
4	Use the ,❷ buttons to select the desired item.
	Then press the OK or ❿ button.
				Display Setup
		TV Aspect	: 4:3 L-Box
		Black Level
		NTSC Disc Output	: PAL
		DVD Out	: RGB

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1.4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2.4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3.16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

Black Level

Adjusts the brightness of the screen.(On/Off)

NTSC Disc Output

“NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave “ PAL” as is.

DVD Out

RGB : Sends RGB signal from the AV JACK (SCART terminal).

S-Video : Sends S-VIDEO signal from the AV JACK (S-Video terminal).

Video : Sends COMPOSITE VIDEO signal from the AV JACK (SCART terminal).

ENG-32 ENG-33