Samsung SV-DVD540 Searching for a Specific Sequence, Next, Etc Seq Played Seq. etc

VCR Playing a Sequence Frame by Frame

Searching for a Specific Sequence VCR

GB

1

You can:

◆Stop the cassette at a given frame (image)

◆Advance one frame at a time

➢No sound is heard when playing back frame by frame.

1Press:

◆❿ll to start playing the cassette

◆❿ll button one more time to make still mode.

◆F.ADV/STEP ( ) to advance frame by frame

2To return to normal playback, press ❿ll.

➢Vertical stability: When playing back frame by frame, interference may be seen on the screen. Press the TRK

( , ) buttons to minimize this effect.

Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts.

The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows:

		➞
	Prev	Seq. being	Next
etc.	Seq.	played	Seq. etc.
2	1	1	2

➢This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.

Go to 0:00:00 Stop

Use this feature when you want to search for the 0:00:00 counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to 0:00:00.

The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position.

OK

GB

VCR Playing a Sequence at Variable Speeds

1	After pressing the SEARCH, press the corresponding or ❷
	buttons, until the Go To (0:00:00) option is selected.

2Press the OK or ❿.

1

1

You can vary the playback speed using the Shuttle function (up to nine times the normal speed).

Example: You wish to analyze a sportsperson’s technique, movement by movement.

The Shuttle function is available on the Remote control

➢No sound is heard when playing a sequence at variable speeds.

1Press:

◆❿ll during playback

◆SHUTTLE (<<) to play the cassette backwards

◆SHUTTLE (>>) to play the cassette forwards

2Each time you press a SHUTTLE button, the speed is changed as shown in the following illustration.

REVERSE	REVERSE	REVERSE		SLOW	SLOW		PLAY	PLAY	PLAY
PLAY	PLAY	PLAY	STILL	MOTION	MOTION	PLAY	X3	X5	X9
X9	X5	X3		X1/10	X1/5

End Search

Use this feature when you want to search for a blank position to record a program on a cassette.

The VCR will fast forward, searching for a blank position, and then automatically stop at that position.If the VCR reaches the end of the tape during end search, the tape will be ejected.

1	After pressing the SEARCH, press the corresponding or ❷
	buttons, until the End Search option is selected.

2Press the OK or ❿.

38 39