Listening to Radio
Remote Control
1 Press the TUNER button to select the FM band. 2 Tune in to the desired station.
Automatic Tuning 1 : When the 
button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the 
, 
button to automatically search for active broadcasting stations.
Manual Tuning : Briefly press the 
, 
button to increase or decrease the frequency incrementally
Main Unit
1 Press the FUNCTION button to select the FM band. 2 Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( 
) button to select <PRESET> and then press the 
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( 
) button to select <MANUAL> and then press and hold
the 
button to automatically search the band.
Manual Tuning : Press the STOP ( 
) to select <MANUAL> and then briefly press the button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 in the memory
1 Press the TUNER button to select the FM band. 2 Press the 
, 
button to select <89.10>.
3 Press the TUNER MEMORY button.
“01” flashes in the display.
4 Press the 
button to select preset number.
You can select between 1 and 15 presets.
5 Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before “number” disappears from the display. “number” disappears from the display and the station is stored in memory.
6 To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the 
button on the remote control to select a channel.
• This unit does not receive AM broadcasts.
Convenient Functions | ENG |
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press the SLEEP button.
Each time the button is pressed, the preset time changes as follows : 10 ➝ 20➝ 30➝ 60➝ 90➝ 120➝ 150➝ OFF.
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed.
Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press the SLEEP button until <OFF> appears on the display.
Adjusting Display Brightness
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the DIMMER button.
Each time the button is pressed, the brightness of front display will be adjusted.
Mute Function
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
<MUTE> appears in the display.
To restore the sound, press the button again. | MISCELLANEOUS |
|
60 | 61 |