Samsung E138A 00141K, DVD-E238 Setting Up the Audio Options, Digital Output, Dynamic Compression

With the unit in Stop mode, press the MENU button.

E138A 00141K-2(GB)XTC 4/9/03 10:21 AM Page 50

Setting Up the Audio Options

Surround Sound Speaker Setup (DVD-P538K only)

1 With the unit in Stop mode, press the MENU button.

2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.

3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4 Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

Digital Output

1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
NOTE	• Be sure to select the correct Digital Output
	or no audio will be heard.
	• When Multi Channel Output select Digital.
	Dolby & MPEG-2 Digital Out works.

	AUDIO SETUP
Digital Output	: PCM
DTS	: Off
Dynamic Compression	: On
PCM Down Sampling	: On
Multi Channel Output	: Digital
Speaker Setup

1

2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.

3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4 Select Multi Channel Output using UP/DOWN buttons. Then select Analog pressing the RIGHT or ENTER button.

5 Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button.

6 Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button.

The default settings : FRONT L , R (Large), CENTER(None), SURROUND (None)

Select the size of the speakers to be connected.

• Front (FL , FR)

- Large: Normally select this.

- Small: When the sound cracks or the surround sound effects are

difficult to hear, select this. This activates the Dolby Digital bass

AUDIO SETUP

Digital Output	: PCM
DTS	: Off
Dynamic Compression	: On
PCM Down Sampling	: On
MultiMulti ChannelChannel OutputOutput	:: AnalogAnalog
Speaker Setup

AUDIO SETUP

Digital Output	: PCM
DTS	: Off
Dynamic Compression	: On
PCM Down Sampling	: On

DTS

1.Off : Doesn’t output digital signal.

2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.

Dynamic Compression

1. On : To select dynamic compression.

2. Off : To select the standard range.

PCM Down Sampling

1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.

2.Off : Select this when the amplifier connected to the player is 96KHz compatible.

In this case, all signals will be output without any changes.

Multi Channel Output (DVD-P538K only)

1.Digital : Select this when using the multichannel digital audio output.

2.Analog : Select this when using the multichannel analog audio output.

Speaker Setup (DVD-P538K only)

NOTE

•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.

•Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

50

redirection circuitry and outputs the bass frequencies of the speaker

from the subwoofer.

• Center

- None: If you do not connect a center speaker, select this.

- Large: Normally select this.

- Small: When the sound cracks, select this. This activates the Dolby

Digital bass redirection circuitry and outputs the bass frequencies of

the center speaker from other speakers.

• Surround (SL, SR)

- None: If you do not connect a center speaker, select this.

- Large (Rear/Side): Normally select either of these according to the

rear speaker’s position.

- Small (Rear/Side): When the sound cracks or the surround sound

effects are difficult to hear, select either of these according to the

rear speaker’s position. This activates the Dolby Digital bass

redirection circuitry and outputs the bass frequencies of the rear

speaker from other speakers.

Setting up TEST

The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system.

FRONT(L) CENTER SUBWOOFER FRONT(R)

SURROUND(R) SURROUND(L)

Multi Channel Output	: Analog
SpeakerSpeaker SetupSetup

NOTE	SETUPMENU	CHANGING
• How to make the SETUP
menu disappear or return to
menu screen during set up.
Press RETURN or LEFT button.
• The subwoofer test output
signal is lower than the other
speakers.
• The MPEG Multichannel logo
is a trademark registered by
PHILIPS Corporation.

51