Samsung DVD-E360/ZA Basic functions, Playing a Disc, Using the Search and Skip Functions

RED WHITE

Coaxial kabel	B	Audio kabel
WHITE		WHITE

RED RED

YELLOW

Video kabelA

Audio kabel C Scart kabel

RED WHITE YELLOW

Basic functions

Playing a Disc

Before Play

-Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control.

-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press the π/† button, and then press the ENTER button. (This screen will only appear when you plug in the player for the first time.)If the language for the startup screen is not set, the set-tings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.Once you select a menu language, you can change it by pressing the ® button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language.

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching through a Chapter or Track

During play, press the SEARCH (k or K) button on the remote control for more than 1 second.

		Note
DVD	2X, 4X, 8X, 16X, 32X	-	The speed marked in this function may be different from the
CD	2X, 4X, 8X, 16X, 32X		actual playback speed.
		-	No sound is hearing during search mode (Except CD).

Skipping Tracks

During play, press the SKIP (k or K) button.

-When playing a DVD, if you press the SKIP (K) button, it moves to the next chapter. If you press the SKIP (k) button while play time <5s,it moves to previous chapter, but if you press SKIP (k), while play time >5s it moves to the beginning of the current chapter.

-When playing a CD, if you press the SKIP (K) button while play time <5s,it moves to previous track, but if you press SKIP (k) while play time >5s it moves to the beginning of the current track.

Using the Display Function

When Playing a DVD/MPEG4

1.During play, press the TOOLS button on the remote control.

2.Press the π/† buttons to select the desired item.

3.Press the √/® buttons to make the desired setup.

4.To make the screen disappear, press the TOOLS button again.

The Tool Button Display functions are listed in the table below.

To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified.

Most DVD discs are recorded in chapters (similar to tracks on an audio CD). Select this function to find and play a specific chapter.

Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs.

Lets you select the soundtrack language for a film. A DVD disc can have up to eight different soundtracks.

Lets you select the subtitle language or, if you prefer, turn off subtitles. A DVD disc can have up to 32 different sets of subtitles, each in a different language.

EZ Lets you choose the EZ-View type

Select to activate the Zoom function.

Some DVDs have scenes that have been recorded at multiple angles. Use the Angle function to view a scene at one of those angles.

5