C O N N E C T I O N S
Connecting to a TV (Video)
1
Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.
2
Turn on your DVD player and TV.
3
Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen.
RED | WHITE | YELLOW |
| Audio Cable | Video Cable |
| (Included) | (Included) |
RED | WHITE | YELLOW |
Note
-Noise may be generated if the audio cable placed too close to the power cable.
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
-The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.
-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.
-If you press the VIDEO SEL. button when the DVD Player is in play mode, stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (
When HDMI is connected, these output modes will not appear.