KS1A_01602B_ENG 8/13/02 3:00 PM Page 22
Selecting the Sound Mode (depending on the model)
ENG
The “S.MODE
| Type of broadcast | |||||
|
|
|
|
|
| |
| Regular broadcast | MONO | (Normal use) | |||
| (Standard audio) | |||||
|
|
|
|
| ||
|
|
|
|
| ||
| Regular + | MONO ↔ MONO | ||||
NICAM | NICAM Mono | NICAM | (Normal) | |||
|
|
|
|
| ||
Stereo | NICAM Stereo | STEREO | ↔ MONO | |||
| ||||||
| NICAM | (Normal) | ||||
|
| |||||
|
|
|
|
| ||
| NICAM | |||||
| NICAM NICAM (Normal) | |||||
|
| |||||
|
| → | → | |||
|
|
|
|
|
| |
| Regular broadcast | MONO (Normal use) | ||||
| (Standard audio) | |||||
|
|
|
|
| ||
A2 |
|
|
|
|
| |
Bilingual or | ↔ | |||||
Stereo | ||||||
|
|
|
|
|
| |
| Stereo | STEREO | ↔ MONO | |||
|
|
| (Forced Mono) | |||
|
|
|
| |||
|
|
|
|
|
|
➣◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the “MONO” position using the S.MODE
◆If the stereo signal is weak (or if intermittent
◆When receiving mono sound in the AV mode, connect to the “L” input jack on the panels. If the mono sound comes out only from the left speaker, then press the S.MODE
Switching the Sound Off Temporarily
You can switch the sound off temporarily, for example you may wish to answer the telephone.
1 Press the MUTE button.
Result: The sound is switched off and “ ” is displayed.
2When you wish to turn the sound back on at the same volume as
before, press the MUTE button again (or either of the volume buttons).
22